Low Poly Skull Bead (Horizontal, Spirit Island)

This is a simple bead made by shrinking the linked Low Poly Skull down to 15mm width (roughly half inch), and putting a 2.4mm hole through the temples so it balances facing forward when on a rod.

I made this for a Fear Counter for the board game Spirit Island, but it can be used for whatever.

If using it as an abacus/number line, a 2mm rod works perfectly.

I printed this without supports, with a 0.4mm nozzle at 0.08 layerheight using some of my ‘mini’ settings because it's tiny with details. Without supports, the internals get gummed up with failed bridges, but the outside looks just fine.