[KR] Deckers insert

Released in Korea

This is an organizer designed to fit the Deckers package case.

[Related Model Recommendations]

• Deckers Token Edge Cover (3D output covers applied to each token shown above)

( https://makerworld.com/ko/models/3021776-deckers-token-edge-cover#profileId-3395041 )

[Key Features]

• Individual storage for each component
• Includes card sleeves (additional Boardpia accessories, sleeve sizes 65x91 and 90x127mm with 0.07mm thickness)
• Internal height margin for storing rulebooks (approx. 2mm)
• Hinged cover on the token box designed to allow the game box to stand and store (requires 3x2mm magnet)

(Note: The hinge part of the case is thin, so under heavy load, the hinge of the lid may easily break.)

[Additional Information]

• For items like token boxes, place 3x2mm magnets in each hinge cover secured using adhesive. (Storage can be secured)
• For the main card tray, you can attach a nameplate to indicate the storage location of each card.

(Instead of a 3D printed nameplate, you can replace it with a name tag using a 6mm label printer.)

※ If the bottom appears to be attached when printing the case,

If you carefully fold the hinge part, the attached part is thin and comes off relatively easily.

(For smooth operation when printing the hinge section, we recommend using a 0.12mm layer output.)

※ Please note that this method uses Bamboo Studio's top/bottom layer 0 and internal fill output settings.

(If you are printing with another slicer, please use the internal fill settings separately.)

(+ If you are concerned about the durability of the mesh section, you can reset the output settings for that part of the object to output in a filled form.)