[KR] Paths of Glory (Book Box Series) insert

Released by DiceTree Games / Boardpia

This organizer was created to fit the Paths of Glory board game bookbox series case.
(See DiceTree Games Book Box series: https://dicetreegames.com/home/book_box.php?cn=CA&trk= reference)

+ Due to the output size of accessories, a printer bed size of H2 series (H2S, H2D, H2C, etc.) or higher is required.

[Key Features]

• Includes card sleeves (0.07mm standard)

• Card trays are detachable, optimizing storage by configuring token trays with each storage box

• Hinged cover on the token box designed to allow the game box to stand and store (requires 3x2mm magnet)

• Spacious interior space for storing game boards and rulebooks

(Note: The hinge part of each token box is thin, so under heavy load, the hinge of the lid can easily break.)

[Additional Information]

• For token boxes, place four 3x2mm magnets in each box using adhesive. (Lid can be fixed)

※ If the bottom part appears to be attached when printing the token box,

If you carefully fold the hinge part, the attached part is thin and comes off relatively easily.

(For smooth operation when printing the hinge section, we recommend printing only the 0.12mm layer of the token box.)

※ For Token Box Mini accessories,

Please refer to this method using Bamboo Studio's top/bottom layer 0 and internal fill output settings.

(If you are printing with another slicer, please use the internal fill settings separately.)

(+ If you are concerned about the durability of the mesh section, you can reset the output settings for that part of the object to output in a filled form.)