Everdell Occupied Door Token (Stone + Wood style)

for Everdell (2018) Layer by Layer

Fr33lab

Tokens & Resources Free

View on MakerWorld 141 332 Added May 19, 25 | Updated Aug 6, 26 Support Fr33lab by Liking and Boosting their model.

Plan Your Print

✓ Optional multicolor profile The designer also offers a multicolor way to print this (an MMU/AMS profile or per-color parts)

About 21 g of filament From the designer's print profile

Print Profile (2) AMS, 0.2mm layer, 2 walls, 15% infill 1h 49m 21 g PLA

AMS, 0.2mm layer, 2 walls, 15% infill

1 plate 1h 49m 21 g PLA

P1S, X1E, A1 mini, A1, X1 Carbon, H2D, P1P, X1, H2D Pro, H2S, P2S, H2C, X2D, A2L

This is the AMS version. You can select the colors for four parts of the token: • the door • the stones • the door handle • the groat between the stones

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1 · 20x + Box + Lid

1h 49m 21 g PLA · 9 g PLA · 12 g

NO AMS, 0.2mm layer, 2 walls, 15% infill

2 plates 1h 21m 17 g PLA

P1S, A1 mini, H2D, X1E, P1P, X1, X1 Carbon, A1, H2D Pro, H2S, P2S, H2C, X2D, A2L

This is a version for NON-AMS-users with a single color chance before height 2.2mm (the last two layers with a different color). The base should be the wood-style color, the second color for the stones.

Plate Details (2)

0.4 mm nozzle, all plates

Plate 1 · 20x

50m 9 g PLA · 1 g PLA · 8 g

Plate 2 · Box + Lid

31m 8 g PLA · 8 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Designer's Description

Boost Me You can boost this model, if you like the designer's work. Thank you!

These are 3D-printed occupied tokens for the great board game Everdell! In comparison to the original paper ones, these have some benefits:

a little bit larger and bigger and therefore more handy
a little bit heavier to stay on the cards
real 3D style, so the stones and the door handle are higher than the wood-style door
you can use both sides of the tokens (AMS version)

In addition I created a space-saving small box for the 20 tokens with a snap in lid.

Tested successfully with PLA, no support and no brim required.

The colors I used:

for the wood-parts of the token: Bambu Lab PLA Wood Black Walnut 13107
for the stone parts of the token: Bambu Lab PLA Basic Light Grey 10104
for the grout: I also used PLA Wood here, but I also tested with PLA Beige 10201 (in combination with stones in dark grey 10105)
for the box: Bambu Lab PLA Wood Black Walnut 13107

Don't forget to follow me to get all my future models. If you like my work, I am very thankful for a boost!

If you have any questions or ideas, just let me know, thank you. I am looking forward to your comments and builds!

everdell