LayerUp Stats 11
Add Jul 11, 26 Edit Sep 12, 26 Sync Aug 6, 26
Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.

Crokinole Disc Piece Holder

for Crokinole (1876) Layer by Layer
sadlyno
Organizers Free
View on MakerWorld 2 3 Added May 22, 26 | Updated Aug 5, 26 Support sadlyno by Liking and Boosting their model.
Plan Your Print
About 45 g of filament From the designer's print profile
Print Profile (3) With Support and Interface Layer 1h 46m 45 g PLA, PLA-S
With Support and Interface Layer
1 plate 1h 46m 45 g PLA, PLA-S
P1S, P2S, H2D, A1, X1 Carbon, H2S, X1, H2C, A1 mini, X1E, H2D Pro, X2D, P1P, A2L
WITH SUPPORT PROFILE: -Variable layer height -Layer Ironing -Support interface layer of your choosing -0.16mm base layer height -2 walls -15% infill
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
1h 46m 45 g PLA · 44 g PLA-S · 1 g
Without support
1 plate 1h 31m 39 g PLA
P1S, P2S, X2D, P1P, A1 mini, X1 Carbon, H2D, X1, A1, H2S, X1E, H2D Pro, H2C, A2L
-0.16mm with adaptive layer height -2 walls -15% infill
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
1h 31m 39 g PLA · 39 g
TPU Gasket
1 plate 32m 8 g TPU-AMS
P1S, P2S, P1P, H2D Pro, A1, X1 Carbon, H2S, H2C, X1E, A1 mini, H2D, X2D, X1, A2L
-1 wall loop -15% infill -TPU for AMS
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
32m 8 g TPU-AMS · 8 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description

Please Read!

This holder is meant for 2 player (8 piece) or 4 player play (6 piece).

There are 2 important decisions you must make before printing this:

1: There is quite the over-hang where this attaches to the side of the board, It prints fine but leaves a semi-noticeable droop without support. I have uploaded 2 printing profiles, one without support, and one with support including and interface layer. I have used PETG and support for PLA as interface layers, both work well. I would not recommend using support without and interface layer - It would be very hard to remove from the dove tail joints I think.

2: My Crokinole board has an edge that varies from 6mm to 8mm in thickness, so I designed a stepped TPU gasket that prints separately and friction fits into the body of the holder from the bottom. The model will work just fine without this piece, it will just lean off the board a bit more and not be a snug fit. I don't think this gasket can be printed from anything else as I made it a 0mm interference fit with the part. Please either make it out of tpu or don't print it.

If you have the type of Crokinole board that is an octagon; please let me know the thickness of the sides and the distance flat to flat of the board, I will post another model for you. :)

Lastly, If you want more Crokinole accessories like this please follow me as I'm working on more.

crokinole piece holder hanging
Crokinole box art Crokinole 1876 Layer by Layer
Cover Colors

Main colors from the cover art. Find matching filament, or tap swatches to narrow.

Matching filament
Expansions
Crokinole Cards 2022 Crokinole Imperium 2022 Ready Five 2020