Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Lords of Waterdeep Coins
Tokens & Resources
Free
Plan Your Print
2 makers
Sign in
to track this print from Want to Printed.
About 54 g of filament
From the designer's print profile
Print Profile (2) 0.2mm nozzle, 0.1mm layer, 4 walls, Detect thin wall 18h 22m 54 g PLA
0.2mm nozzle, 0.1mm layer, 4 walls, Detect thin wall
2 plates
18h 22m
54 g PLA
X1 Carbon, P1S, P1P, X1, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
Enabling Detect thin wall is the key to getting things to turn out nicely.
Plate Details (2)
0.2 mm nozzle, all plates
Plate 1
5h 49m
22 g
PLA · 22 g
Plate 2
12h 33m
32 g
PLA · 32 g
Inlaid Coins - 2 Colors (AMS)
2 plates
24h 9m
74 g PLA
A1, H2D Pro, H2D, H2S, H2C, P2S, X2D, A2L
Just a little bit of extra pop for your table
Coins have been painted to be two colors with ‘inlay’. I have printed mine with metallic silk PLA for the main coins and then translucent PLA for the internal parts. I printed mine with a 0.4mm nozzle, becuase I don't have a 0.2 at the moment. Definitely worth getting the extra detail out of your 0.2mm nozzle though if you have one.
Plate Details (2)
0.2 mm nozzle, all plates
Plate 1 · Large Inlaid
9h 5m
30 g
PLA · 7 g
PLA · 23 g
Plate 2 · Small Inlaid
15h 4m
44 g
PLA · 5 g
PLA · 39 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description
Coins for the game Lords of Waterdeep that try to stay true to the original designs.
Use a 0.2 mm hotend and ensure “detect thin wall” is enabled for best results. I used Bambu Silk+ Gold for my print, and glued the front and back faces together afterwards.
I scanned the coins, traced them in Inkscape, extruded them in FreeCAD, and then sliced the model in half in Bambu Studio to print both sides face up. Thanks @Jaryth000 for helping me get the print profile tweaked, particularly for suggesting “detect thin wall”, and for getting me to try the 0.2 mm hotend!
