Arkham Horror LCG: Card Storage Trays

for Arkham Horror: The Card Game (Revised Core Set) (2021) Layer by Layer

also fits Arkham Horror: The Card Game (2016)

jester

Card & Tile Holders Free

View on MakerWorld 100 399 Added May 1, 24 | Updated Aug 5, 26 Support jester by Liking and Boosting their model.

Remix View the original model (Printables)

Plan Your Print

About 120 g of filament From the designer's print profile

Print Profile (3) 0.2mm layer, 2 walls, 15% infill 3h 52m 120 g PLA

0.2mm layer, 2 walls, 15% infill

1 plate 3h 52m 120 g PLA

X1 Carbon, X2D, H2D Pro, P1S, H2D, X1, A1, H2S, H2C, X1E, A2L, P2S, P1P

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

3h 52m 120 g PLA · 120 g

0.2mm layer, 2 walls, 15% infill

2 plates 3h 59m 122 g PLA

A1 mini, X2D, H2D Pro, P1S, H2D, X1, A1, H2S, H2C, X1E, A2L, P2S, X1 Carbon, P1P

Reoriented to fit on the A1 mini.

Plate Details (2)

0.4 mm nozzle, all plates

Plate 1

2h 16m 68 g PLA · 68 g

Plate 2

1h 42m 54 g PLA · 54 g

Chapter 2 size trays - 0.2mm layer, 2 walls, 15% infill

1 plate 4h 6m 131 g PLA

A1, A2L, H2D, H2S, H2C, H2D Pro, P2S, X2D

Slightly trimmed version of the original so fits Chapter 2 box 0.20mm standard on an A1 with a .4 nozzle, printed with Sunlu PLA+ 2.0 and worked a treat

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

4h 6m 131 g PLA · 131 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Designer's Description

WARNING: Please use proper print profile from Torin to print for the new 2026 chapter 2 core box!

This is a remix of Spinodal_Zeugma 's Arkham Horror LCG: Card Storage Trays for New Game Box Size . This is a storage solution that fits exactly into the new core box or any campaign expansion box. It needs to be printed 2x times for both sides. Afterwards the middle part can be filled with the storage boxes from the same author [1].

Both parts are fully rebuilt in Fusion 360, with the following changes/improvements:

The front part now also has slots to put dividers. In the original model only the tray end had these slots.
The slots to put the dividers was (in my opinion) in the wrong direction. So I changed the angle, to be in line with the front angled part.
The front part has an angled part which was not the same angle as the slots for the dividers. So, I made a new front which has the same angle (76 degrees), which improves storage space.
I removed some material from the bottom that is not really needed, so save some filament.

[1] https://www.printables.com/model/843055-arkham-horror-lcg-box-trays-fitted-to-encounter-de

arkham arkham horror arkhamhorrorlcg arkhamhorror