Mottainai Deluxe Insert

This insert is for the Mottainai Deluxe box and will hold two decks of cards. Currently I have one Mottainai deck and the Wutai Mountain expansion deck in the box. This will only hold two decks of cards so it will not hold both deluxe decks and the the Wutai deck. Generally I prefer Mottainai with 2-3 people and Glory to Rome for 4 or 5, so having just the one base deck and the expansion deck is fine with me.

This was one of the first things I made in Tinkercad and I goofed up the dimensions a little. The front to back depth of the insert was 3mm smaller than the box so I have some slop. This also resulted in the cutout for the rulebook being a little too short, so I just trimmed the rule book to fit. I increased the size of the STL file by 3mm so I expect future prints shouldn't have the rule book fit issue, but before printing you might want to verify the height of your rule book against the cutout in the STL file.