Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.

Dominion Kingdom Card table

Plan Your Print
About 164 g of filament From the designer's print profile
Print Profile 6h 55m 164 g PLA
What it takes
2 plates 6h 55m 164 g PLA
A1 mini, X1 Carbon, A1, P1S, X1E, P2S, P1P, H2C, H2D, X1, H2S, H2D Pro, X2D, A2L
I have had warping issues with the front right side of the plate with large prints; the pieces are oriented such that if warping does occur, it occurs in the least-critical spot. But the wide brim seemed to prevent it here.
Plate Details (2)
0.4 mm nozzle, all plates
Plate 1
3h 21m 79 g PLA · 79 g
Plate 2
3h 35m 85 g PLA · 85 g
Designer's Description

This is a board to hold the 10 Kingdom Cards used during a game of Dominion. The 3MF file contains one-half of the board; you will need to print it twice. Print once, check the fit, then print the other half.

You can keep the pieces loose, or glue them together. The pegs are intentionally a little loose; coat with rubber cement if you want a firmer grip but still want to be able to disassemble it.

dominion dominioncardgame game board game table deck building