Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Planet Unknown lid for SUSAN
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 18 g of filament
From the designer's print profile
Print Profile (2) 0.4mm nozzle, 0.2mm layer, 8 walls, 15% infill 32m 18 g PLA
0.4mm nozzle, 0.2mm layer, 8 walls, 15% infill
1 plate
32m
18 g PLA
A1, H2S, H2D Pro, H2D, P2S, H2C, X2D, A2L
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
32m
18 g
PLA · 18 g
0.8mm nozzle, 0.4mm layer, 5 walls, 20% infill
1 plate
24m
20 g PLA
A1, H2S, H2D, H2D Pro, P2S, H2C, X2D, A2L
Print profile for a 0.8mm nozzle. Print the entire lid in under 1 hour.
Plate Details (1)
0.8 mm nozzle, all plates
Plate 1
24m
20 g
PLA · 20 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description
Planet Unknown lid for SUSAN
If you don't have a lid accessory for SUSAN, this is a must-have. The lid prevents tiles from spilling out and reduces mess in the box. This lid allows you to store the game box vertically.
The lid consists of three identical parts that can be glued together for better effect.
I printed mine using a 0.8mm nozzle and the entire set took less than an hour to print. With a 0.4mm nozzle, the print time was about 1.5 hours.
Boost Me If you like my project and it improved your experience with the game Planet Unknown, I would be grateful for a boost
