Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.

Andromeda's Edge Insert (Retail Version)

Inserts Free
Plan Your Print
Covers Andromeda's Edge: Genesis, Andromeda's Edge: Escalation Expansions this print stores alongside the base game
About 944 g of filament From the designer's print profile
Print Profile (2) 0.16mm layer, 2 walls, 15% infill 40h 58m 944 g PLA
0.16mm layer, 2 walls, 15% infill
17 plates 40h 58m 944 g PLA
A1, H2S, H2D Pro, H2D, P2S, H2C, X2D, A2L
Plate Details (17)
0.4 mm nozzle, all plates
Plate 1
1h 4m 20 g PLA · 19 g PLA · 1 g
Plate 2
59m 19 g PLA · 18 g PLA · 1 g
Plate 3
1h 3m 20 g PLA · 19 g PLA · 1 g
Plate 4
1h 3m 20 g PLA · 19 g PLA · 1 g
Plate 5
1h 3m 20 g PLA · 19 g PLA · 1 g
Plate 6
1h 36m 36 g PLA · 30 g PLA · 6 g
Plate 7
12h 28m 238 g PLA · 238 g
Plate 8
2h 23m 49 g PLA · 49 g
Plate 9
5h 34m 150 g PLA · 150 g
Plate 10
1h 30m 55 g PLA · 55 g
Plate 11
1h 30m 36 g PLA · 31 g PLA · 5 g
Plate 12
1h 20m 33 g PLA · 28 g PLA · 5 g
Plate 13
3h 18m 81 g PLA · 81 g
Plate 14
2h 36m 81 g PLA · 81 g
Plate 15
2h 14m 63 g PLA · 63 g
Plate 16
1h 4m 19 g PLA · 19 g
Plate 17
14m 4 g PLA · 4 g
0.16mm layer, 2 walls, 15% infill
28 plates 55h 26m 1,211 g PLA
A1 mini, X1 Carbon, X1, P1P, P1S, H2D, A1, H2D Pro, H2S, P2S, H2C, X1E, X2D, A2L
Profile for the A1 Mini, with the large parts cut up, and I have also included some dividers for the events tray. • Solo Box - 4 pieces • Solo Cover - 4 pieces • Factions Box - 2 Pieces • Factions Cover - 2 Pieces • Parts Tray - 2 Pieces I would advise gluing the parts with super glue after assembly. Note that any amount of elephants foot will make these parts hard to slot together as there is zero tollerance included! I recommend using a craft knife to de-burr the bottom of the tab edges on one half, then push that down into the other half, and then gently hammer them flat against the table. After that use some thin superglue which will seep into the cracks, to glue them permently together.
Plate Details (28)
0.4 mm nozzle, all plates
Plate 1
3h 12m 61 g PLA · 54 g PLA · 3 g PLA · 3 g PLA · 1 g
Plate 2
2h 11m 42 g PLA · 37 g PLA · 3 g PLA · 2 g
Plate 3
4h 30m 105 g PLA · 87 g PLA · 18 g
Plate 4
3h 4m 70 g PLA · 58 g PLA · 12 g
Plate 5
4h 36m 83 g PLA · 83 g
Plate 6
4h 36m 83 g PLA · 83 g
Plate 7
3h 55m 73 g PLA · 73 g
Plate 8
1h 30m 36 g PLA · 31 g PLA · 5 g
Plate 9
1h 21m 33 g PLA · 28 g PLA · 5 g
Plate 10
3h 18m 81 g PLA · 81 g
Plate 11
1h 14m 34 g PLA · 34 g
Plate 12
3h 25m 73 g PLA · 73 g
Plate 13
15m 4 g PLA · 4 g
Plate 14 · Solo 1
2h 47 g PLA · 47 g
Plate 15 · Solo 2
1h 16m 28 g PLA · 28 g
Plate 16 · Solo 3
2h 1m 48 g PLA · 48 g
Plate 17 · Solo 4
1h 16m 29 g PLA · 29 g
Plate 18 · Faction 1
58m 24 g PLA · 24 g
Plate 19 · Faction 2
55m 22 g PLA · 22 g
Plate 20
47m 18 g PLA · 18 g
Plate 21 · Solo Lid 1
34m 16 g PLA · 16 g
Plate 22 · Solo Lid 2
36m 17 g PLA · 17 g
Plate 23 · Solo Lid 3
28m 13 g PLA · 13 g
Plate 24 · Solo Lid 4
27m 12 g PLA · 12 g
Plate 25
1h 32m 48 g PLA · 48 g
Plate 26
29m 13 g PLA · 13 g
Plate 27
2h 30m 49 g PLA · 49 g
Plate 28
2h 29m 49 g PLA · 49 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description
Andromeda's Edge Insert for Retail Version

Including Andromeda's Edge base game, Escalation and Genesis expansions, and Exotic Matter Promo. Support Sleeves, Solo and 5th player.

0.4 nozzle & 0.16 layer height.

You need to print:

  • 5x Player box (with different colored edges : White, Yellow, Green, Blue and Purple)
  • 2x Resources box (to split resources around the table)
  • 4 x Module box in 4 colors : Yellow, Blue, Green, Brown (or Gold)
  • 1 x Neutral ship upgrade box (with white edge)
  • 1 x Faction ship upgrade box (with yellow edge)
  • 1 x Solo box and 1 x Solo cover
  • 1 x Faction cards box and 1 x Faction cover
  • 2 x Region tiles box
  • 1 x Event cards box
  • 1 x Raiders cards box
  • 1 x Tokens box
  • 2 differents box for Raiders standee and dice.
  • 1 x Stands box
  • 5 differents box for development tiles and cards, with different colored edges : Yellow, Blue, Green, Red, Brown (or Gold)

Everything fits in the game box, but it closes with 1cm more.

Resources are not included on this page, I purchased them from Etsy.

License is for Personal Use Only . Please don't use it to sell physical copies or resell it.

andromeda's edge boardgame accessories
Andromeda's Edge box art Andromeda's Edge 2024 Layer by Layer
Cover Colors

Main colors from the cover art. Find matching filament, or tap swatches to narrow.

Matching filament