Stone age Boardgame insert

Figures hut:

4x Walls/Main body: No support

4x Roof (without the tip): Tree support, recommended to avoid the threads with support generation.

4x Tip of the roof: print separate from the roof with no support in the different colors of each player

Tool Shed:

Wall/main Body: No support

Roof: Auto Tree support

Building tiles hut:

Lower walls: No supports

Top walls: no support

roof: Tree support at least in the middle overhanging part

AMS option : print the top walls and roof together. Also possible if you switch filament at the layer where the roof starts.

Food basket :

4x Main basket: Use glue because it starts with small dots, no support needed.

4x Lid: print with the bottom facing down and use auto tree support.

Resources crate:

4x Main crate: print the 3 layers separate with the pins sticking out from the top. Use auto tree support on the 2 layers without the bottom planks. Glue recommented

The 3 layers need to be glued together

2x Lid: No support, Glue recomented

Dice container:

Bottom: No support

Lid: facing top down, auot tree support

Card sleeve: print laying down with tree support on bed only

Inlay: no support, i used 5% infill