Multi-color Scoring Flags for Carcassonne Meeples

Use these flags to denote when you've gone around the scoring track and earned 50 points!

These are multi-color prints with a layer-based filament color changed. I used a Basic Grey for the outside, and Silk PLA for the numbers and stripe on the sides.

There is a plate if you don't want to use different colors for each score value, and also a plate without color changes if you don't want any color at all.

The easiest way to put them on is to hook the Meeple's arm and push the flag towards it's head. If it doesn't fit, try the arm on the other side, or a different meeple altogether! It should be a snug fit, and the plastic can bend a bit.

• Plates 1-6 will print 5 of each flag with a different color stripe/text
• Plate 7 will print all the flags with the same color stripe/text
• Plate 8 will print all the flags without any color swaps
• Plate 9 will print one set of flags with reversed colors, if you want to create a unique flag set for each Meeple color

Not all Meeple figures are the same size, so I've included a test plate of a single flag that you can scale to various sizes. 100% fits my C3 set really well, but for my C1 set, the meeples are a bit smaller and 100% is loose.

Someone wanted a flag with a deeper offset, so you can try the “thicker” profile. This is a thicker flag that has numbers which have a deeper inset into the flag. I found that it's slightly harder to see the numbers from an angle, but it might dependent on your lighting and color scheme!

I appreciate your comments, photos, and boosts! Thank you!