So Clover - discs w removable writing cards

for So Clover! (2021) Layer by Layer

Card & Tile Holders Free

Plan Your Print

About 84 g of filament From the designer's print profile

Print Profile 2h 49m 84 g PLA

What it takes

3 plates 2h 49m 84 g PLA

X1 Carbon, P2S, P1S, H2D Pro, X1E, H2C, H2S, X1, P1P, A1, H2D, X2D, A2L

Plate Details (3)

0.4 mm nozzle, all plates

Plate 1 · One full set

1h 4m 37 g PLA · 37 g

Plate 2 · One set of extra cards

21m 7 g PLA · 7 g

Plate 3 · 24 Cards (6 sets)

1h 24m 40 g PLA · 40 g

Designer's Description

Ever wanted to play So Clover but had a group of more than 6? This one is for you!

Some features:

~3 of these can fit in the box without lid lift (if your markers lie flat)
Removable writing cards that can be replaced when badly stained
“Anti-gravity” card slots that hold cards in place even when rotated more than 90 degrees

Some notes:

From my testing, the bottom-most surface on a textured PEI sheet is the most erasable surface, compared to the top surface (stains easily) and ironed surface (doesn't erase properly)
The bottom-most surface still stains a little, so you might eventually need to replace them
I've found that erasing diagonally works best for me, might be due to the direction of the print lines
The writing cards fit in the slots only one way, and you'll need to slot in the curved edges first
I used a tolerance of 0.2mm, which works well for my printer. Your mileage might vary

boardgame accessories