Sushi Go Party! - Game Insert - with Handle!

for Sushi Go Party! (2016) Layer by Layer

Layer51

Inserts Free

View on MakerWorld 87 241 Added Feb 7, 24 | Updated Sep 12, 26 Support Layer51 by Liking and Boosting their model.

Remix View the original model (Printables)

Plan Your Print

About 593 g of filament From the designer's print profile

Print Profile (2) 0.2mm layer, 3 walls, 30% infill 15h 45m 593 g PLA

0.2mm layer, 3 walls, 30% infill

3 plates 15h 45m 593 g PLA

P1S, P1P, X1, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

I used 3 walls and lightning to cut down on print time/filament usage and it seemed to work just fine. Be sure to use supports for the handle. I also included a pre-colored text in the print file for ease.

Plate Details (3)

0.4 mm nozzle, all plates

Plate 1 · Side walls removed

5h 2m 191 g PLA · 191 g

Plate 2 · side walls included

5h 13m 202 g PLA · 202 g

Plate 3

5h 31m 200 g PLA · 197 g PLA · 3 g

A1 mini version

2 plates 6h 21m 235 g PLA

A1 mini, P2S, A1, H2C, P1P, P1S, X1, H2D, X1E, H2D Pro, X1 Carbon, H2S, X2D, A2L

Model split into two interlocking pieces in order to print it on the A1 mini. Takes a bit of force to slide the two halves togheter, but once it's done they are pretty much stuck, no glue required. I also changed the tree supports to “slim” in order to avoid a giant support that was forming.

Plate Details (2)

0.4 mm nozzle, all plates

Plate 1 · Side walls removed

3h 58m 152 g PLA · 152 g

Plate 2

2h 23m 83 g PLA · 83 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Designer's Description

Just a slight variation of the existing Susi Go Party Insert that adds a handle and height adjustments so it is not likely to wobble around too much within the metal container and keep all the cards and game pieces in-place.

This was printed in .3 and will need supports for the handle.

sushi sushigoparty game storage board game box card holder card organizer game oraganization