Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Tiny Potion Bottle (for flamecraft boardgame)
Tokens & Resources
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 56 g of filament
From the designer's print profile
Print Profile (2) 0.2mm layer, 2 walls, 15% infill 4h 16m 56 g PETG
0.2mm layer, 2 walls, 15% infill
2 plates
4h 16m
56 g PETG
P1S, P1P, X1, X1 Carbon, X1E, A1, A1 mini, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
0.2 layer height
3 raft layers (had adheision trouble)
85c bed temp
Plate Details (2)
0.4 mm nozzle, all plates
Plate 1
2h 26m
34 g
PETG · 21 g
PETG · 11 g
PETG · 2 g
Plate 2
1h 50m
22 g
PETG · 14 g
PETG · 6 g
PETG · 2 g
Simplified 2-Color (No Brim)
1 plate
19m
4 g PLA
X1 Carbon, A1, A1 mini, X1, X1E, H2D, P1S, P1P, H2D Pro, H2S, P2S, H2C, X2D, A2L
This is a great little model, but I wanted a simpler version with lower print time and filament cost. I eliminated the internal third color and translucent outer layer. I also manually painted to eliminate all but the must-have color change for the cork.
A single potion takes less than 20 minutes and 3.2 grams of filament. Print 10 from Bambu Handy for just 7.1 grams of filament in about 30 minutes. You can knock out 100 in 3 hours and still just use under 50 grams. I expect these to be very popular in my 4 for $1 bin when printed in larger quantities from Bambu Studio.
NOTE: I use SuperTack-like third-party plates, so you may need to turn the brim back on if you use other plate types or have adhesion challenges.
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
19m
4 g
PLA · 3 g
PLA · 1 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description
A potion bottle for the purple potion resource in flamecraft the board game. Uses transparent PETG to make the potion visible. I needed to up the bed temp to 85c to get the cheapish transparent PETG I used to adhere to the bed when printing more than one.
