Zombicide Tile Edge System

VERSION 2 IS AVAILABLE - IMPROVEMENTS/FIXES/STORAGE - FOLLOW THIS LINK

DEPRICATED : I'm keeping this version online in case someone needs spare parts

--------------------------------------

Print instructions:

• Print the parts you need.
• Keep supports on for the Corner pieces, remove brim if you are confident in your build plate.
• For a Corner, you need to print the Corner and 2 clips (one of each type).
• For a Straight, you need to print the Straight and 2 clips (one of each type).
• You do not need to print clips for the Connector pieces.
• The clips are pressed into place as shown on the images.
• Clips are designed to be put in at an angle.
• Use a hard surface to press the clip an the piece together.

Usage Instructions:

The system has been designed for easy use if you follow these guides.

• Assembly: When assembling your tiles, put on the Corners and the Straights first, then add Connectors afterwards.
• Disassembly: When disassembling, remove the Connectors first.

If a clip should unexpectedly break during disassembly at a game night, you can easily replace it without having to print a new large piece.