Agent Avenue Inlay + Erweiterung

for Agent Avenue (2024) Layer by Layer

MeomoreX

Free

View on MakerWorld 11 107 Added Nov 14, 25 | Updated Sep 8, 26 Support MeomoreX by Liking and Boosting their model.

Plan Your Print

About 107 g of filament From the designer's print profile

Print Profile (3) 0.2mm layer, 2 walls, 15% infill for bigger mepples 2h 44m 104 g PLA

0.2mm layer, 2 walls, 15% infill for bigger mepples

1 plate 2h 44m 104 g PLA

P1S, X1, X1 Carbon, P1P, H2C, P2S, H2S, X1E, A1, H2D, H2D Pro, A1 mini, X2D, A2L

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

2h 44m 104 g PLA · 104 g

0.2mm layer, 2 walls, 5% infill

1 plate 3h 50m 107 g PLA

P1S, X1 Carbon, X1, H2S, H2D Pro, A1, H2C, P1P, H2D, P2S, X1E, A1 mini, X2D, A2L

0,20mm Standart Profil Fülldichte 5% ohne Stützen

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

3h 50m 107 g PLA · 107 g

[US Box] 0.2mm layer, 2 walls, 15% infill

1 plate 2h 52m 100 g PLA

A1 mini, H2C, H2S, X1, P2S, X1 Carbon, A1, H2D, X2D, A2L, P1S, P1P, X1E, H2D Pro

I printed the original model that MeomoreX made, however, it did not fit my game box (bought in the US) and my meeples are too fat to fit the slots. MeowmoreX's design is my favorite for this game insert, so I decided to edit the model to make the insert fit my box (using my not professional modeling skill). I trimmed the 4 edges to preserve the rounded corner for the game board, length is good now but the width is still too wide plus my meeples are still fat. So I cut the model's middle meeple divider out (I don't know how to connect the remaining parts, so just left it like that :D) Now it fit's perfectly!! My game version shows barcode `2026-2`, and due to the inconsistency of the manufacture I've seen in other comments, you might wanna check if your US version size is the same as mine.

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

2h 52m 100 g PLA · 100 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Designer's Description

I made an inlay for Agent Avenue here. The figures for the expansion also fit in here. Including a recess for the game board.

In terms of dimensions, sleeved cards should also fit.

This is the German version. There seem to be some different sizes as far as the non-European version is concerned. Again and again the figures don't fit in. You are welcome to send me the measurements of the figures and the box here. Then I can also adapt and offer these variants.

It would also be important to mention that the box of the original game is larger than that of the expansion. This inlay is for the original cardboard.

Dimensions of the print file are 172x121.

Translated from German - show original

Ich habe hier ein Inlay angefertigt für Agent Avenue. Hier passen auch die Figuren für die Erweiterung rein. Inklusive Aussparung für das Spielbrett.

Von den Maßen her sollten auch gesleevte Karten reinpassen.

Das hier ist die Deutsche Version. Es scheint wohl einige unterschiedliche größen zu geben was die nicht europäische Version angeht. Immer wieder passen wohl die Figuren nicht rein. Gerne könnt ihr mir hier die Maße von den Figuren und vom Karton zusenden. Dann kann ich diese Varianten auch anpassen und anbieten.

Wichtig wäre auch zu erwähnen das der Karton des originalspiels größer ist, als der von der Erweiterung. Dieses Inlay ist für den original Karton.

Maße von der Druckdatei sind 172x121.

agent avenue agent avenue spiel brettspiel