Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Agent Avenue Card Game Travel Box
Card & Tile Holders
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
✓ Fits sleeved cards
About 66 g of filament
From the designer's print profile
Print Profile 2h 48m 66 g PLA, PETG
What it takes
4 plates
2h 48m
66 g PLA, PETG
A1, P1S, P1P, H2S, H2D, P2S, X1, A1 mini, X1E, X1 Carbon, H2D Pro, H2C, X2D, A2L
I printed all pieces in different colors on separate plates, but the lid and box may be printed together in the same color to save time using PLA supports.
Plate Details (4)
0.4 mm nozzle, all plates
Plate 1 · lid
1h 8m
24 g
PLA · 21 g
PETG · 3 g
Plate 2 · box
1h 14m
40 g
PLA · 40 g
Plate 3 · player pieces
13m
1 g
PLA · 1 g
Plate 4 · player pieces
13m
1 g
PLA · 1 g
Designer's Description
Travel-friendly carrying box for the card game Agent Avenue. The deck box stores the cards and the lid functions as the board. The two player pieces can be snapped into the inner sides of the box to hold the cards down and to minimize loose pieces sliding around while traveling. The rulebook does not fit inside unless it's folded tightly in fourths.
Printing tips:
- I used four different colors because it looks nicer, but really only the player pieces need to be printed in different colors. I put two on each plate as spares.
- I printed the lid in PLA with PETG supports to make the supports easier to remove, but if you don't have PETG or want to reduce print time, you can put the lid and the box all on the same plate and print using PLA supports. The supports will just be a little harder to clean and remove but it still works.
- I haven't tested with sleeved cards but the box and all the pieces can probably be scaled a little bit to fit sleeves.
/pic9691540.jpg)
