LayerUp Stats 32

Add Jul 11, 26 Sync Sep 17, 26

Table Talk

Nothing here yet. Love this design? Say so - the designer might see it.

Mansions of Madness Box Insert 2nd Edition

for Mansions of Madness (2011) Lift the Lid

Inserts Free

View on MakerWorld 39 133 Added Oct 11, 23 | Updated Sep 7, 26 Support MakerIggs by Liking and Boosting their model.

Also Found On Printables 30

Remix of View the original model

Plan Your Print

About 1,382 g of filament

Print Profile (2) 0.28mm layer, 2 walls, 15% infill 18h 14m 1,382 g PLA

0.28mm layer, 2 walls, 15% infill

6 plates 18h 14m 1,382 g PLA

P1S, P1P, X1, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

Divided insert for bamboo dimensions (to be glued). The only minus compared to the original is the lower tray, one compartment holds one less figure (visible in the photos).

Plate Details (6)

0.4 mm nozzle, all plates

Plate 1 · mid2of2

2h 1m 152 g PLA · 152 g

Plate 2 · bottom3of3_and_mid1of2

2h 49m 215 g PLA · 215 g

Plate 3 · top1of2

3h 29m 261 g PLA · 261 g

Plate 4 · top2of2

3h 1m 213 g PLA · 213 g

Plate 5 · bottom1of3

3h 46m 300 g PLA · 300 g

Plate 6 · bottom2of3

3h 7m 241 g PLA · 241 g

0.28mm layer, 2 walls, 15% infill

13 plates 21h 7m 1,388 g PLA

A1 mini, P1S, P1P, X1, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

Splitted the parts so that you can print it on the A1 mini. It is not nice, but it is a large model. You will need to glue the pieces together.

Plate Details (13)

0.4 mm nozzle, all plates

Plate 1 · mid2of2

2h 41m 189 g PLA · 189 g

Plate 2 · top2of2

1h 32m 94 g PLA · 94 g

Plate 3

1h 14m 81 g PLA · 81 g

Plate 4

1h 22m 89 g PLA · 89 g

Plate 5

1h 29m 95 g PLA · 95 g

Plate 6

54m 55 g PLA · 55 g

Plate 7

1h 45m 112 g PLA · 112 g

Plate 8

1h 55m 136 g PLA · 136 g

Plate 9

2h 19m 165 g PLA · 165 g

Plate 10

1h 14m 75 g PLA · 75 g

Plate 11

1h 17m 78 g PLA · 78 g

Plate 12

1h 46m 109 g PLA · 109 g

Plate 13

1h 38m 110 g PLA · 110 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Designer's Description

These beasts are 286x286. Just barely fitting on a CR10 model bed. I wound up printing them on my Ender 5 Plus which has plenty of room. Each was printed in about 28 hours with a .6 nozzle at .3mm layer height.

This design was not my own but I took the dimensions from https://www.reddit.com/user/Blouz.here : https://imgur.com/a/o5oGS

User abpat2203 started this project and looks like they only finished or about finished the bottom so I wasn't exactly sure where they left off and decided I would started over from scratch with the dimensions. I have made a few minor adjustments on the middle box after I printed to make it fit slightly better.

Excellent work Blouz, you gave me a great head start but it did take some finagling to convert foam to filament.

Print Settings

Printer Brand:

Creality

Rafts:

Supports:

Resolution:

0.3

Infill:

15%

Filament:
Beartech PLA

Black