Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Portable dice tower and storage (print in place)
Dice Towers & Trays
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 55 g of filament
From the designer's print profile
Print Profile 1h 17m 55 g PLA
What it takes
1 plate
1h 17m
55 g PLA
P1S, P1P, X1, X1 Carbon, X1E, A1, H2D, A1 mini, H2D Pro, H2S, P2S, H2C, X2D, A2L
Made a profile as this model did not have one. I found that it works well to keep your dice from rolling of the table. The first time closing the tower takes a little bit of extra force and then it works perfectly.
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
1h 17m
55 g
PLA · 55 g
Designer's Description
This is a simple and very portable dice tower. Small enough to fit in a pocket (may vary on your pocket size), yet fully functional as a dice tower. Including a hinged lid that doubles as the dice tray and enough space inside to carry your favourite set of 7 standard sized dice along with it.
The entire model prints in place without supports (0.25mm horizontal clearance), ready to use right off the build plate!
Version 2 is now available!
- The lid now fully closes off the holes, no more small dice falling out!
- The lid now snaps closed so it won't fall open if you lift it by the lid.
- The hinge is no longer visible from the inside of the tower and it's longer so it doesn't pop out as easily.
Designed for the following print settings, but it should print fine with most standard profiles:
- 0.2mm layer height
- 2 walls
- 0.4mm line width
- No supports (max overhang is 45)
- minimal infill (or none, if your printer can do 25mm long internal bridges without problems).
To easily store the dice:
- Close the lid most of the way and hold it there
- Insert your dice
- Close the lid all the way