Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Dice Jail Shutter
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 28 g of filament
From the designer's print profile
Print Profile (2) Version 2 1h 34m 36 g PLA
Version 2
2 plates
1h 34m
36 g PLA
P2S, H2S, H2C, P1P, A1, H2D, P1S, X1 Carbon, A1 mini, X1, H2D Pro, X1E, X2D, A2L
Plate Details (2)
0.4 mm nozzle, all plates
Plate 1 · D=28 H=40
1h 8m
29 g
PLA · 29 g
Plate 2 · With support
25m
7 g
PLA · 7 g
0.2mm layer, 2 walls, 7% infill
1 plate
1h 10m
28 g PLA
P1S, X1 Carbon, P2S, H2D Pro, X1, H2C, H2S, P1P, A1, A1 mini, X1E, H2D, X2D, A2L
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1 · Dice jail
1h 10m
28 g
PLA · 28 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description
Are you tired of rolling a nat 1 over and over again. Here is your solution, lock up your bad dice and let it see how you roll better with an other dice. Next time it will consider twice before rolling a nat 1 again.
The user SchwartzMonster came up with this idea and I liked it. That's the story of my Dice Jail.
Version 2:
- snap pins for better press fit without glue
- little design changes
- inner diameter reduced to get same outer diameter as old version
- added plate with support for the cap if you have problems with the overhangs in the inside
Features:
- no glue
- simple press together
- shutter
- customizable
- add inner and/or outer stl images via the Customize function
Print profile:
- support for grip hole in base
Advice:
- as mentioned from @RockMountainSou , let the shutter cool before removing, it will break easily when you try to remove it with force from the plate