Log in to join the conversation.
Stuffed Fables Box Insert / Organizer
This is a rework from ground basedon xgrubers "Stuffed Fables Box Organizer".
There is really nothing new, just some changes:
- splitted figure trays for better printing with smaller printers
- consistent wall thickness for better printing:
o either 3*0.4 mm = 1.2 mm
o or 4*0.4 mm = 1.6 mm
- slightly optimized space usage
- slightly lower floor thickness
- works with sleeved cards
Everything else is nearly the same.
Hints regarding printing thin walls:
Printing a wall with a thickness of 1.2mm with a 0.4 nozzle is sometimes sliced to 4 lines instead of 3. If this happens to you just set the linewidth to 0.45. --> Faster print and quite sturdy.
Happy gaming.
01. Jan. 2019: Turned the box for small status cards from a single small box into a large divided one and lowered the speechbubble box.
Stuffed Fables 2018
Layer by Layer
Cover Colors
/pic5843211.jpg)
/pic6161052.jpg)
Stuffed Fables Box Insert / Organizer by Slidr Jan 2, 2019 This is a rework from ground basedon xgrubers "Stuffed Fables Box Organizer". There is really nothing new, just some changes: splitted figure trays for better printing with smaller printers consistent wall thickness for better printing: o either 30.4 mm = 1.2 mm o or 40.4 mm = 1.6 mm slightly optimized space usage slightly lower floor thickness works with sleeved cards Everything else is nearly the same. Hints regarding printing thin walls: Printing a wall with a thickness of 1.2mm with a 0.4 nozzle is sometimes sliced to 4 lines instead of 3. If this happens to you just set the linewidth to 0.45. --> Faster print and quite sturdy. Happy gaming. Jan. 2019: Turned the box for small status cards from a single small box into a large divided one and lowered the speechbubble box.