Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Dice Holder for D&D Dice Set
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 90 g of filament
From the designer's print profile
Print Profile (2) 0.2mm layer, 2 walls, 15% infill 2h 53m 90 g PLA
0.2mm layer, 2 walls, 15% infill
1 plate
2h 53m
90 g PLA
X1 Carbon, P1S, P1P, X1, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
2h 53m
90 g
PLA · 90 g
Bigger D10 slots, 0.2mm layer, 2 walls, 15% infill
1 plate
3h 10m
95 g PLA
X1 Carbon, P1S, P1P, X1, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
As originally designed, some of my die sets were too large for the D10 spots. I stretched just the section with those two spots. Overall it is just under 4mm longer and the D10/D% slip in and out with similar tolerances as the other dice now. I stretched the scabbard as well to accomodate
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1 · STRETCHED BUT 100%
3h 10m
95 g
PLA · 95 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description
A prop/cosplay sword and sheath that holds a standard dice set for D&D. I printed a bunch of these out for friends for Christmas or birthday gifts super easily, only very minor supports needed.
The hilt and blade have some nubs that interlock, but what I did was I used the hot end of my hot glue gun to melt the nubs and melt a bit in the hilt to create an uneven surface to let the hot glue really hold with a strong bond. I also just tried plain super glue and it held really well, but not as sturdy as the hot glue gun method.