Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Playing card holder (divideable)
Card & Tile Holders
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 113 g of filament
From the designer's print profile
Print Profile (5) Standard profile 2h 20m 113 g PLA
Standard profile
1 plate
2h 20m
113 g PLA
X1 Carbon, H2D, P1P, H2C, P2S, H2S, P1S, X1E, A1, H2D Pro, X1, X2D, A2L
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
2h 20m
113 g
PLA · 113 g
A1 Mini Profile
2 plates
2h 37m
116 g PLA
A1 mini, A1, P2S, H2S, P1S, H2C, H2D Pro, X1, X1E, P1P, X1 Carbon, H2D, X2D, A2L
Plate Details (2)
0.4 mm nozzle, all plates
Plate 1
1h 17m
57 g
PLA · 57 g
Plate 2
1h 19m
59 g
PLA · 59 g
Optimised printing time, P1S, increased layer height
1 plate
2h
99 g PLA
P1S, H2D Pro, H2D, H2S, X1 Carbon, X1E, H2C, X1, P2S, P1P, A1, X2D, A2L
With correct support
increased layer height
short printing time
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
2h
99 g
PLA · 99 g
A1 mini best settings for time and filament usage
2 plates
1h 52m
67 g PLA
A1 mini, A1, X1 Carbon, H2C, X1E, H2D Pro, P1P, H2D, H2S, P2S, X1, P1S, X2D, A2L
Plate Details (2)
0.4 mm nozzle, all plates
Plate 1
55m
33 g
PLA · 33 g
Plate 2
57m
34 g
PLA · 34 g
0.6mm nozzle, 0.3mm layer, 2 walls, 12% infill
1 plate
1h 56m
109 g PLA
P1S, H2D Pro, P2S, H2S, H2C, H2D, A1, X1, X1E, X1 Carbon, X2D, A2L, P1P
Added a print profile for the 0,6mm nozzle with a little bit reduced infill.
Plate Details (1)
0.6 mm nozzle, all plates
Plate 1
1h 56m
109 g
PLA · 109 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description
This playing card holder consists of two parts that can be easily assembled. The curved design ensures that other players cannot see your cards. When combined, it offers plenty of space for around 18 playing cards. Nevertheless, it does not take up much space in the cupboard and can be printed on an A1 Mini printer. The slot is designed for ease of use and the cards stand at a comfortable angle.
Silicone pads:
If desired, silicone pads up to 10 mm in diameter can be attached to the round cutouts on the underside for more grip. In my case, the pads have a diameter of 8 mm.
Print settings:
standard except for the following values:
- Bottom shell layers: 5
- Tree support for the RH part
- Wall loop: I recommend 3 walls instead of 2 if the model is printed in light colors such as white or yellow.
