Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Card Deck Box - print in place hinge - snap shut
Card & Tile Holders
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 103 g of filament
From the designer's print profile
Print Profile 2h 32m 103 g PLA
What it takes
2 plates
2h 32m
103 g PLA
P1S, H2D Pro, A1 mini, H2D, X1, A1, P1P, P2S, X2D, X1E, X1 Carbon, H2C, H2S, A2L
I've set the infill to gyroid to avoid the print head bashing that the default grid infill does.
Also the Elephant Foot setting is at 0.25mm rather than the default 0.15
The clearances in the print in place hinge are tight, If you have problems with the hinge printing ensure that you are not using old filament and that the filament is dry.
The PiP hinge may fail if printed with filament that swells such as PLA Silk, it might work, but if it fails it's no fault of the model or print profile.
Plate Details (2)
0.4 mm nozzle, all plates
Plate 1 · Standard Deck
1h 17m
53 g
PLA · 53 g
Plate 2 · Bridge Deck
1h 14m
50 g
PLA · 50 g
Designer's Description
Print in place card boxes in two sizes, standard on one plate and bridge/poker card size on the second. They are slightly higher than the standard deck so that they will accommodate a well used pack.
These boxes can also be used to hold Pokemon lor other trading cards.
Note: This print may not work with PLA Silk or other filaments that may expand on printing.
Boost Me If these boxes help keep your cards tidy, please consider Boosting the model to get it shared more widely
