Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Tray of Card Sorting
Card & Tile Holders
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 154 g of filament
From the designer's print profile
Print Profile (3) 0.2mm layer, 3 walls, 15% infill 4h 44m 154 g PLA
0.2mm layer, 3 walls, 15% infill
1 plate
4h 44m
154 g PLA
X1 Carbon, X1, H2D, H2S, H2C, X1E, P2S, P1S, H2D Pro, P1P, X2D, A2L
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
4h 44m
154 g
PLA · 154 g
0.2mm layer, 3 walls, 15% infill, Fixed Front
1 plate
6h 6m
151 g PETG
P1S, H2S, P2S, H2D Pro, P1P, X1 Carbon, X1, H2D, X1E, A1, H2C, X2D, A2L
Printed in PETG HF Matte. I made this profile to fix the front end on this great tray. The original model prints the left side (front of the tray) starting on the second layer. That means that entire portion of the model is a bridge. I placed a primitive object to fill that gap and clean up that part of the tray.
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
6h 6m
151 g
PETG · 151 g
5% wider for sleeved cards
1 plate
5h 32m
159 g PLA
X2D, H2S, P2S, A1, H2D Pro, H2C, X1, X1E, P1S, H2D, A2L, X1 Carbon, P1P
I just made the trays slightly wider to fit sleeved cards better. increased the width of the print by 5%, sleeve in image is Dragon Shield. this has the fixed front from HiThere_FaceHere
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
5h 32m
159 g
PLA · 159 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description
I bought a tray off amazon and was like wait… you have a 3d printer dumbass.
each section can hold 40-45 cards comfortably, 80-90 if you're feeling adventurous.