Standard Board Game Card Holder

for Tabletop Accessories Layer by Layer

Card & Tile Holders Free

Plan Your Print

About 95 g of filament From the designer's print profile

Print Profile (4) SLEEVED 0.2mm layer, 2 walls, 15% infill 2h 33m 95 g PLA

SLEEVED 0.2mm layer, 2 walls, 15% infill

1 plate 2h 33m 95 g PLA

A1, H2D, H2D Pro, X1, P1P, H2C, X2D, P1S, A2L, P2S, X1E, X1 Carbon, H2S

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

2h 33m 95 g PLA · 95 g

UNSLEEVED 0.2mm layer, 2 walls, 15% infill

1 plate 2h 29m 91 g PLA

A1, H2D, H2D Pro, X1, P1P, H2C, X2D, P1S, A2L, P2S, X1E, X1 Carbon, H2S

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

2h 29m 91 g PLA · 91 g

SLEEVED HALF HEIGHTS 0.2mm layer, 2 walls, 15% infill

1 plate 2h 3m 76 g PLA

A1, P1S, A2L, H2C, X1 Carbon, X2D, X1E, H2D Pro, H2S, H2D, P2S, X1, P1P

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

2h 3m 76 g PLA · 76 g

UNSLEEVED HALF HEIGHTS 0.2mm layer, 2 walls, 15% infill

1 plate 2h 73 g PLA

A1, P1S, H2C, X2D, X1 Carbon, X1, H2D Pro, A2L, P1P, H2D, H2S, X1E, P2S

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

2h 73 g PLA · 73 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Designer's Description

Card holder that fits standard 64x89mm cards like Pokemon, MTG etc.

Two different options: sleeved or unsleeved

Five different heights: 20mm, 30mm, 40mm, 50mm and 60mm

UPDATE: I have now included 25mm, 35mm, 45mm and 55mm height options as a separate print profile (labelled ‘HALF HEIGHTS’)

I tried to make these lightweight yet will protect the cards when stored in game boxes or on the table. Walls are 1mm thick.

Check out the horizontal version here :

card holder card organizer card tray