LayerUp Stats 5

Add Jul 14, 26 Sync Sep 1, 26

Table Talk

Nothing here yet. Love this design? Say so - the designer might see it.

BUILD TRAY 2.0

Organizers Free

View on MakerWorld 500 507 Added May 3, 26 | Updated Sep 1, 26 Support SEELE DESIGN by Liking and Boosting their model.

Plan Your Print

About 182 g of filament From the designer's print profile

Print Profile (15) DEFAULT PRINT PROFILE FOR ANY OF THE TRAY LAYOUTS 4h 182 g PLA

DEFAULT PRINT PROFILE FOR ANY OF THE TRAY LAYOUTS

1 plate 4h 182 g PLA

P1S, P1P, A2L, H2D Pro, H2D, X1, H2S, P2S, H2C, X2D, A1, X1 Carbon, X1E

USE THIS AS THE BASIC DEFAULT 0.2MM PLA PRINT SETUP FOR ALL FOR AVAILABLE TRAYS. TWEAK AS REQUIRED. RECOMMENDED MATERIAL: PLA RECOMMENDED INFILL: 15% RECOMMENDED SURFACE PATTERN: MONOTONIC LINE RAFTS: NONE SUPPORTS: NONE (ADJUST YOUR SLICER AS NEEDED TO REDUCE HULL LINES)

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

4h 182 g PLA · 182 g

BLANK TRAY LAYOUT 0.2mm layer, 2 walls, 15% infill

1 plate 2h 47m 137 g PLA

P1S, P1P, X1E, H2C, P2S, X2D, X1 Carbon, A2L, A1, X1, H2D Pro, H2S, H2D

BLANK TRAY LAYOUT, DEFAULT PLA PRINT SETTINGS ADJUST AS YOU SEE FIT. PRINT SETTINGS: RECOMMENDED MATERIAL: PLA RECOMMENDED INFILL: 15% RECOMMENDED SURFACE PATTERN: MONOTONIC LINE RAFTS: NONE SUPPORTS: NONE PRINTER USED: BAMBU LABS P1S FILAMENT USED: BAMBU LABS PLA MATTE (ADJUST YOUR SLICER AS NEEDED TO REDUCE HULL LINES)

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

2h 47m 137 g PLA · 137 g

3X4 GRID TRAY LAYOUT 0.2mm layer, 2 walls, 15% infill

1 plate 4h 9m 194 g PLA

P1S, X1E, A1, X1, X2D, X1 Carbon, H2D Pro, P1P, H2S, P2S, H2C, A2L, H2D

TRAY WITH A 3x4 GRID LAYOUT, DEFAULT PLA PRINT SETTINGS ADJUST AS YOU SEE FIT. PRINT SETTINGS: RECOMMENDED MATERIAL: PLA RECOMMENDED INFILL: 15% RECOMMENDED SURFACE PATTERN: MONOTONIC LINE RAFTS: NONE SUPPORTS: NONE PRINTER USED: BAMBU LABS P1S FILAMENT USED: BAMBU LABS PLA MATTE (ADJUST YOUR SLICER AS NEEDED TO REDUCE HULL LINES)

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

4h 9m 194 g PLA · 194 g

TRAY CAP 0.2mm layer, 2 walls, 15% infill

1 plate 1h 46m 89 g PLA

P1S, P1P, X1E, H2C, P2S, X2D, X1 Carbon, A2L, A1, X1, H2D Pro, H2S, H2D

TRAY CAP FOR TOP OF YOU TRAY TOWER (OPTIONAL), DEFAULT PLA PRINT SETTINGS ADJUST AS YOU SEE FIT. PRINT SETTINGS: RECOMMENDED MATERIAL: PLA RECOMMENDED INFILL: 15% RECOMMENDED SURFACE PATTERN: MONOTONIC LINE RAFTS: NONE SUPPORTS: NONE PRINTER USED: BAMBU LABS P1S FILAMENT USED: BAMBU LABS PLA MATTE (ADJUST YOUR SLICER AS NEEDED TO REDUCE HULL LINES)

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

1h 46m 89 g PLA · 89 g

1X4 GRID TRAY LAYOUT 0.2mm layer, 2 walls, 15% infill

1 plate 3h 35m 172 g PLA

P1S, H2S, P2S, A1, H2D Pro, X1, H2C, X1E, H2D, A2L, X2D, X1 Carbon, P1P

TRAY WITH A 1x4 GRID LAYOUT, DEFAULT PLA PRINT SETTINGS ADJUST AS YOU SEE FIT. PRINT SETTINGS: RECOMMENDED MATERIAL: PLA RECOMMENDED INFILL: 15% RECOMMENDED SURFACE PATTERN: MONOTONIC LINE RAFTS: NONE SUPPORTS: NONE PRINTER USED: BAMBU LABS P1S FILAMENT USED: BAMBU LABS PLA MATTE (ADJUST YOUR SLICER AS NEEDED TO REDUCE HULL LINES)

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

3h 35m 172 g PLA · 172 g

3X5 GRID TRAY LAYOUT 0.2mm layer, 2 walls, 15% infill

1 plate 4h 25m 205 g PLA

P1S, X2D, H2D Pro, H2D, X1, A1, H2S, H2C, X1E, A2L, P2S, X1 Carbon, P1P

TRAY WITH A 3x5 GRID LAYOUT, DEFAULT PLA PRINT SETTINGS ADJUST AS YOU SEE FIT. PRINT SETTINGS: RECOMMENDED MATERIAL: PLA RECOMMENDED INFILL: 15% RECOMMENDED SURFACE PATTERN: MONOTONIC LINE RAFTS: NONE SUPPORTS: NONE PRINTER USED: BAMBU LABS P1S FILAMENT USED: BAMBU LABS PLA MATTE (ADJUST YOUR SLICER AS NEEDED TO REDUCE HULL LINES)

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

4h 25m 205 g PLA · 205 g

2X5 GRID TRAY LAYOUT 0.2mm layer, 2 walls, 15% infill

1 plate 4h 6m 194 g PLA

P1S, X2D, X1E, X1, X1 Carbon, H2S, H2C, P1P, H2D, P2S, A2L, H2D Pro, A1

TRAY WITH A 2x5 GRID LAYOUT, DEFAULT PLA PRINT SETTINGS ADJUST AS YOU SEE FIT. PRINT SETTINGS: RECOMMENDED MATERIAL: PLA RECOMMENDED INFILL: 15% RECOMMENDED SURFACE PATTERN: MONOTONIC LINE RAFTS: NONE SUPPORTS: NONE PRINTER USED: BAMBU LABS P1S FILAMENT USED: BAMBU LABS PLA MATTE (ADJUST YOUR SLICER AS NEEDED TO REDUCE HULL LINES)

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

4h 6m 194 g PLA · 194 g

2X3 GRID TRAY LAYOUT 0.2mm layer, 2 walls, 15% infill

1 plate 3h 35m 172 g PLA

P1S, X1E, A1, X1, X2D, X1 Carbon, H2D Pro, P1P, H2S, P2S, H2C, A2L, H2D

TRAY WITH A 2x3 GRID LAYOUT, DEFAULT PLA PRINT SETTINGS ADJUST AS YOU SEE FIT. PRINT SETTINGS: RECOMMENDED MATERIAL: PLA RECOMMENDED INFILL: 15% RECOMMENDED SURFACE PATTERN: MONOTONIC LINE RAFTS: NONE SUPPORTS: NONE PRINTER USED: BAMBU LABS P1S FILAMENT USED: BAMBU LABS PLA MATTE (ADJUST YOUR SLICER AS NEEDED TO REDUCE HULL LINES)

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

3h 35m 172 g PLA · 172 g

1X3 GRID TRAY LAYOUT 0.2mm layer, 2 walls, 15% infill

1 plate 3h 18m 161 g PLA

P1S, X1E, P1P, X2D, A2L, H2D, X1 Carbon, H2S, H2C, A1, H2D Pro, X1, P2S

TRAY WITH A 1x3 GRID LAYOUT, DEFAULT PLA PRINT SETTINGS ADJUST AS YOU SEE FIT. PRINT SETTINGS: RECOMMENDED MATERIAL: PLA RECOMMENDED INFILL: 15% RECOMMENDED SURFACE PATTERN: MONOTONIC LINE RAFTS: NONE SUPPORTS: NONE PRINTER USED: BAMBU LABS P1S FILAMENT USED: BAMBU LABS PLA MATTE (ADJUST YOUR SLICER AS NEEDED TO REDUCE HULL LINES)

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

3h 18m 161 g PLA · 161 g

3X3 GRID TRAY LAYOUT 0.2mm layer, 2 walls, 15% infill

1 plate 3h 52m 183 g PLA

P1S, X2D, H2D Pro, H2D, X1, A1, H2S, H2C, X1E, A2L, P2S, X1 Carbon, P1P

TRAY WITH A 3x3 GRID LAYOUT, DEFAULT PLA PRINT SETTINGS ADJUST AS YOU SEE FIT. PRINT SETTINGS: RECOMMENDED MATERIAL: PLA RECOMMENDED INFILL: 15% RECOMMENDED SURFACE PATTERN: MONOTONIC LINE RAFTS: NONE SUPPORTS: NONE PRINTER USED: BAMBU LABS P1S FILAMENT USED: BAMBU LABS PLA MATTE (ADJUST YOUR SLICER AS NEEDED TO REDUCE HULL LINES)

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

3h 52m 183 g PLA · 183 g

2X4 GRID TRAY LAYOUT 0.2mm layer, 2 walls, 15% infill

1 plate 3h 50m 183 g PLA

P1S, H2C, X1E, P1P, A1, P2S, H2D Pro, X1, H2D, X2D, X1 Carbon, A2L, H2S

TRAY WITH A 2x4 GRID LAYOUT, DEFAULT PLA PRINT SETTINGS ADJUST AS YOU SEE FIT. PRINT SETTINGS: RECOMMENDED MATERIAL: PLA RECOMMENDED INFILL: 15% RECOMMENDED SURFACE PATTERN: MONOTONIC LINE RAFTS: NONE SUPPORTS: NONE PRINTER USED: BAMBU LABS P1S FILAMENT USED: BAMBU LABS PLA MATTE (ADJUST YOUR SLICER AS NEEDED TO REDUCE HULL LINES)

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

3h 50m 183 g PLA · 183 g

2X2 GRID TRAY LAYOUT 0.2mm layer, 2 walls, 15% infill

1 plate 3h 18m 160 g PLA

P1S, X2D, H2D Pro, H2D, X1, A1, H2S, H2C, X1E, A2L, P2S, X1 Carbon, P1P

TRAY WITH A 2x2 GRID LAYOUT, DEFAULT PLA PRINT SETTINGS ADJUST AS YOU SEE FIT. PRINT SETTINGS: RECOMMENDED MATERIAL: PLA RECOMMENDED INFILL: 15% RECOMMENDED SURFACE PATTERN: MONOTONIC LINE RAFTS: NONE SUPPORTS: NONE PRINTER USED: BAMBU LABS P1S FILAMENT USED: BAMBU LABS PLA MATTE (ADJUST YOUR SLICER AS NEEDED TO REDUCE HULL LINES)

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

3h 18m 160 g PLA · 160 g

1X5 GRID TRAY LAYOUT 0.2mm layer, 2 walls, 15% infill

1 plate 3h 50m 184 g PLA

P1S, H2D Pro, X2D, X1 Carbon, H2D, A1, H2S, X1E, P2S, A2L, P1P, H2C, X1

TRAY WITH A 1x5 GRID LAYOUT, DEFAULT PLA PRINT SETTINGS ADJUST AS YOU SEE FIT. PRINT SETTINGS: RECOMMENDED MATERIAL: PLA RECOMMENDED INFILL: 15% RECOMMENDED SURFACE PATTERN: MONOTONIC LINE RAFTS: NONE SUPPORTS: NONE PRINTER USED: BAMBU LABS P1S FILAMENT USED: BAMBU LABS PLA MATTE (ADJUST YOUR SLICER AS NEEDED TO REDUCE HULL LINES)

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

3h 50m 184 g PLA · 184 g

WAVE TRAY LAYOUT 0.2mm layer, 2 walls, 15% infill

1 plate 3h 43m 161 g PLA

P1S, X2D, X1E, X1, X1 Carbon, H2S, H2C, P1P, H2D, P2S, A2L, H2D Pro, A1

TRAY WITH WAVE BASE PATTERN FOR HARDWARE SORTING, DEFAULT PLA PRINT SETTINGS ADJUST AS YOU SEE FIT. PRINT SETTINGS: RECOMMENDED MATERIAL: PLA RECOMMENDED INFILL: 15% RECOMMENDED SURFACE PATTERN: MONOTONIC LINE RAFTS: NONE SUPPORTS: NONE PRINTER USED: BAMBU LABS P1S FILAMENT USED: BAMBU LABS PLA MATTE (ADJUST YOUR SLICER AS NEEDED TO REDUCE HULL LINES)

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

3h 43m 161 g PLA · 161 g

1X2 GRID TRAY LAYOUT 0.2mm layer, 2 walls, 15% infill

1 plate 3h 4m 149 g PLA

P1S, X1E, A1, X1, X2D, X1 Carbon, H2D Pro, P1P, H2S, P2S, H2C, A2L, H2D

TRAY WITH A 1x2 GRID LAYOUT, DEFAULT PLA PRINT SETTINGS ADJUST AS YOU SEE FIT. PRINT SETTINGS: RECOMMENDED MATERIAL: PLA RECOMMENDED INFILL: 15% RECOMMENDED SURFACE PATTERN: MONOTONIC LINE RAFTS: NONE SUPPORTS: NONE PRINTER USED: BAMBU LABS P1S FILAMENT USED: BAMBU LABS PLA MATTE (ADJUST YOUR SLICER AS NEEDED TO REDUCE HULL LINES)

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

3h 4m 149 g PLA · 149 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Designer's Description

DESCRIPTION:

BASED ON ORIGINAL BUILD TRAY. FOR ORGANISATION OF THOSE COMPONENTS YOU'RE ALWAYS LOSING. PROVIDING SORTING AND STORING OF HARDWARE FOR YOUR PROJECTS. WITH CHANGES MADE BASED ON FEEDBACK, NOW STACKABLE FOR STORAGE OF MULTIPLE TRAYS. WITH A CAP IF REQUIRED AND HANDLES FOR EASY SEPARATION.

14 DIFFERENT STYLES, INCLUDING: