Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Dirt Cheap Dollar Tree Parts Organizer Rack -- $5
Organizers
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 242 g of filament
From the designer's print profile
Print Profile (2) 0.28mm layer, 3 walls, 20% infill 4h 22m 242 g PLA
0.28mm layer, 3 walls, 20% infill
1 plate
4h 22m
242 g PLA
P1S, P1P, X1, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
Prints in under 4.5hr at .28 layer height. This uses infill to create the mesh back. Feel free to experiment with different looks by changing the infill setting of the “cube” modifier.
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
4h 22m
242 g
PLA · 242 g
A1 Mini -- 3x4
1 plate
4h 24m
143 g PETG
A1 mini, H2D Pro, H2S, X1E, A1, X1 Carbon, P2S, X1, H2C, P1P, H2D, P1S, X2D, A2L
Resized and reworked to be printable on the A1 Mini
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
4h 24m
143 g
PETG · 143 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description
$5 TOTAL! This parts organizer rack costs about $3 in filament and $2 in little plastic bins found at Dollar Tree. Make sure to buy the rectangular ones and not the round ones.
Boost Me Dig it? Boost it!
This rack is a tiny version of those trendy racks people have been building for large ~27 gallon totes. The bins just slide in and out. While I already had a bunch of organizer cases, I wanted to be able to pull out individual pieces out to work with rather than a whole case of 8 at a time.
Can I buy the little bins online?
You can, but they make you buy a set of 36 sets at a time and they'll be mixed in with round ones, which wont work.
What do you think?