Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Crater - Modular Magnetic Stackable Gaming Trays
Storage & Containers
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 238 g of filament
From the designer's print profile
Print Profile (3) 0.16mm layer, 4 walls, 15% infill 10h 39m 238 g PLA
0.16mm layer, 4 walls, 15% infill
1 plate
10h 39m
238 g PLA
X1 Carbon, P1S, P1P, X1, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
I'd recommend calibrating your filament on this one to make sure the magnets aren't too tight, aside from that there is a lot of flexibility on the settings. No supports on this print. If you're not sure about the magnet fit, print a small piece first to double check, the pressure increased as the magnet gets deeper too, this is intentional.
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1 · CRATER_4 TYPES
10h 39m
238 g
PLA · 238 g
No Branding, 0.16mm layer, 4 walls, 15% infill
1 plate
10h 24m
239 g PLA
X1 Carbon, P1S, P1P, X1, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
I had problems with the text on the bottom causing print issues, so I added some shapes to remove it in studio.
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1 · CRATER_4 TYPES
10h 24m
239 g
PLA · 239 g
A1 Mini Version - 0.2mm layer, 4 walls, 10% infill
2 plates
9h 1m
218 g PLA
A1 mini, P1S, P1P, X1, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
Optimized for the A1 Mini
Plate Details (2)
0.4 mm nozzle, all plates
Plate 1 · CRATER_4 TYPES
4h 34m
109 g
PLA · 109 g
Plate 2
4h 27m
109 g
PLA · 109 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description
I've wanted to create these for a long time, but I just didn't have a great way to make them look good and connect together side to side and also stacking. After experimenting with rectangular magnets, I finally figured it out and they work great, they're lots of fun, super quick to setup and take down and best of all, they work great!
When inserting the magnets, I'd recommend watching the video to make sure you get it right the first time, it will be tough to get the magnets out if you make a mistake.