LayerUp Stats 6

Add Jul 14, 26 Sync Sep 2, 26

Table Talk

Nothing here yet. Love this design? Say so - the designer might see it.

磁铁收纳盒 Magnetic Container

Translated from en · 磁铁收纳盒 Magnetic Container

for Tabletop Accessories Layer by Layer

粮亦丰

Storage & Containers Free

View on MakerWorld 874 2,043 Added Jun 27, 24 | Updated Sep 2, 26 Support 粮亦丰 by Liking and Boosting their model.

Plan Your Print

About 61 g of filament From the designer's print profile

Print Profile (5) improved 0.2mm layer, 2 walls, 15% infill 2h 13m 62 g PLA

improved 0.2mm layer, 2 walls, 15% infill

2 plates 2h 13m 62 g PLA

P1S, P1P, X1, X1 Carbon, X1E, A1, A1 mini, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

使用侧面滑动打开，大幅提高稳定性 Using side sliding opening greatly improves stability. 小幅修改了部分零件，提高打印成功率 Some parts of the components have been slightly modified to improve the success rate of printing.

Plate Details (2)

0.4 mm nozzle, all plates

Plate 1

1h 49m 56 g PLA · 56 g

Plate 2

24m 6 g PLA · 6 g

0.2mm layer, 3 walls, 15% infill

2 plates 2h 11m 61 g PLA

P1S, P1P, X1, X1 Carbon, X1E, A1, A1 mini, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

Plate Details (2)

0.4 mm nozzle, all plates

Plate 1

1h 49m 56 g PLA · 56 g

Plate 2

22m 5 g PLA · 5 g

Optimize parameters and print quickly!

1 plate 2h 6m 59 g PLA

P1S, P1P, X1, X1 Carbon, X1E, A1, A1 mini, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

0.2mm layer, 2 walls, 15% infill

Plate Details (1)

0.4 mm nozzle, all plates

Plate 1

2h 6m 59 g PLA · 59 g

Slow speed for small parts to avoid being knocked off plate.

2 plates 3h 42m 64 g PLA

A1 mini, P1S, P1P, X1, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

I had 3 failed attempts at printing the small parts and had to watch like a hawk to pause and disable parts that failed. Even after slowing down a bit they failed, this profile is much slower and incorporates a few other tricks and successfully printed the parts. I advise using the original profile for the main large parts or go to the global speed tab and reset travel speed and initial layer. Hopefully this helps someone, it's a great model!

Plate Details (2)

0.4 mm nozzle, all plates

Plate 1

34m 5 g PLA · 5 g

Plate 2

3h 8m 59 g PLA · 59 g

A1 - mini, 0.2mm layer, 2 walls, 15% infill

2 plates 2h 42m 64 g PLA

A1 mini, P1S, P1P, X1, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

Plate Details (2)

0.4 mm nozzle, all plates

Plate 1

2h 17m 59 g PLA · 59 g

Plate 2

25m 5 g PLA · 5 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Designer's Description

V2 is coming: https://makerworld.com/zh/models/545095

————————————

微调了部分零件，提高打印成功率（左为新）

Fine-tuned some parts, improving the success rate of printing.（left is new）

如果有支撑问题或热床附着问题，尝试打开brim和支撑，降低打印速度。

大部分情况是不需要做的。

If there are any problems about supports or others, try to open brim and support. Slow down the speed.

In most cases, you don't need to do this.

——————————————————————————

update：

升级版本，使用侧面滑动开启加磁铁锁定，大幅提高稳定性。

Upgrade to the new version with side sliding opening combined with magnetic locking for significantly improved stability.

——————————————————————————————————————————————

简单的磁铁收纳盒，可以收纳各类10mm直径以下的磁铁。用下图的方式安装6*3mm磁铁。

买了一堆磁铁但没有合适的容器，就设计了这玩意。设计目的是尽可能多且稳定地存储磁铁。

灰色版本为旧版，更推荐黑色新版本。

A simple magnetic storage box designed to hold various magnets with a diameter of 10mm or less.

It is designed for installing 6*3mm magnets as shown in the image below.

Translated from en - show original

V2 is coming: https://makerworld.com/zh/models/545095

————————————

微调了部分零件，提高打印成功率（左为新）

Fine-tuned some parts, improving the success rate of printing.（left is new）

如果有支撑问题或热床附着问题，尝试打开brim和支撑，降低打印速度。

大部分情况是不需要做的。

If there are any problems about supports or others, try to open brim and support. Slow down the speed.

In most cases, you don't need to do this.

——————————————————————————

update：

升级版本，使用侧面滑动开启加磁铁锁定，大幅提高稳定性。

Upgrade to the new version with side sliding opening combined with magnetic locking for significantly improved stability.

——————————————————————————————————————————————

简单的磁铁收纳盒，可以收纳各类10mm直径以下的磁铁。用下图的方式安装6*3mm磁铁。

买了一堆磁铁但没有合适的容器，就设计了这玩意。设计目的是尽可能多且稳定地存储磁铁。

灰色版本为旧版，更推荐黑色新版本。

A simple magnetic storage box designed to hold various magnets with a diameter of 10mm or less.

It is designed for installing 6*3mm magnets as shown in the image below.

磁铁 magnet container 收纳收纳工具 magnet box

More by 粮亦丰

磁铁收纳盒 v2 Magnetic Container v2

See more prints by 粮亦丰...