Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Magnetic Book Box
Miniatures
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 63 g of filament
From the designer's print profile
Print Profile (2) Two Colors - 0.2mm layer, 2 walls, 5% infill 1h 36m 63 g PLA
Two Colors - 0.2mm layer, 2 walls, 5% infill
1 plate
1h 36m
63 g PLA
A1, P1S, P1P, X1 Carbon, X1E, X1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
If you have no AMS just add a pause at the 11th layer and switch filament.
Print with a brim, no supports.
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
1h 36m
63 g
PLA · 36 g
PLA · 27 g
A1 mini 95% - 0.2mm layer, 2 walls, 5% infill
1 plate
1h 27m
57 g PLA
A1 mini, P1S, P1P, X1, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
A1 mini Version at 95%. Magnets will still fit
If you have no AMS just add a pause at the 11th layer and switch filament.
Print with a brim, no supports.
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
1h 27m
57 g
PLA · 33 g
PLA · 24 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description
Simple book box I made as part of an advent calendar project for my wife. Print it with a brim in one or more colors, glue four 5x1mm magnets inside, like shown below, and have fun with it. The book in the pictures was printed with bottom surface pattern: Octagram Spiral and on the Bambu Lab 3D Galaxy Effect Sheet.
Since it won't fit on the A1 mini I made a 95% version that still fits the magnets. Dimensions from the pictures are 95% in that version.
Otter model is from here: https://makerworld.com/en/models/720697#profileId-651588