Life Counter v2

A simple two to four digit counter with a small compartment inside, a screw on lid and detents for the number positions.

It is part of a design family, so you do have a few options if you want something different.

Scoreboard variants of this design are available here .

• further optimized for better haptics and printing
• bigger inner diameter of ⌀ 28mm ≈ ⌀ 1.1inch
• with outer dimensions nearly the same
• snap action now with hardness levels to choose from
• choice of gripping ends

For multicolor printing and convinience, 3MF files are provided. There are several modifiers present, deactivate or change them to get your desired outcome.

• Angled grips → less grippy but I like them a lot
• Standard grips → equivalent to v1
• Long grips → a popular request with the hard v1 snap action

• Consists of a negative volume and color modifier → delete both if unwanted

• There are two rhombic shapes provided as modifiers, if you change them to “part” they localy cover the knurling as a whole.
• To get custom patterns just paint individual pyramids of the knurling.

• Light snap → change the “Light_detent” modifier to a negative volume
• Standard snap → provided as default because it felt nice in PLA & PETG
• Hard snap → not as strong as the v1 but nice
• Ultra snap → equivalent or slightly harder compared to the v1 action, v1 got a few “too hard of a snap” comments

• If “optional_ridges” is set to “part” they will be printed → delete if you want plain wheels
• Activate fuzzy skin for the wheel and its countur only! - The values of the depicted wheels are: PD=0.2 and T=0.3.

Depending on the numbers modifier:

• Part → embossed,
• Modifier with color → flush
• Negative part → debossed

In general, choose the type designed for its axle. However, an angled lid will work with a standard axle and vice versa.

The design is optimized for extrusion width of 0.21mm, 0.42mm and 0.63mm.
It also is divisible without remainder by any of the "standard" layer heights 0.08mm, 0.10mm, 0.16mm, 0.20mm , 0.24mm, and 0.30mm.
For a perfect result the first layer needs to match the other layer heights and needs to adhere well to the built plate. → Keep it slow at least for the first layer.

If you like fuzzy skin, you may want to turn it on for the wheels (only!) with “Contour” and values of around PD=0.2 T=0.2.

Material at one's discretion, I opted for PETG.

Optional text on the lid or Axle (like HP & XP) can simply be added via the text shape tool of the slicer. Any font you have installed is possible.

Scaling it has partially been tested. A few % usually work well, please report back in case you tried.

The formula to scale this model to your desire is:

• [desired inner diameter in mm] / 28mm = scaling factor
• [desired outer diameter in mm] / 45mm = scaling factor

Blank wheels allow for custom modifications via the text shape tool of the slicer.

Remixes are not allowed, but if you feel like sharing parts with added/changed/customized details or fonts you're welcome to do so as print profile. - If in doubt, please ask beforehand.

If you still want more out of the design, stay tuned for additional releases on .

If not already printed as multicolor, nail polish or model paint works well to highlight debossed glyphs. For text on the axle or lid a manual filament swap is still advised, using the text shape tool to deboss your text may also be an option.

There may be improvements and modifications based on feedback given here.

Maybe, take a look at my other designs ;-)