LayerUp Stats 10

Add Jul 14, 26 Sync Sep 5, 26

Table Talk

Nothing here yet. Love this design? Say so - the designer might see it.

Vallejo, GSW, Army Painter Skadis full paint rack

Free

View on MakerWorld 1,573 4,606 Added Sep 22, 23 | Updated Sep 5, 26 Support Darth Vader by Liking and Boosting their model.

Remix Reworks another design; the description credits the original.

Plan Your Print

About 507 g of filament From the designer's print profile

Print Profile (3) 0.2mm layer, 3 walls, 15% infill 12h 21m 507 g PLA

0.2mm layer, 3 walls, 15% infill

2 plates 12h 21m 507 g PLA

X1 Carbon, P1S, P1P, X1, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

If you wish to use your own settings from the step files. Make sure that you use the TOP RACK ends for the top section.

Plate Details (2)

0.4 mm nozzle, all plates

Plate 1 · Vallejo rack standard x 4

6h 10m 255 g PLA · 255 g

Plate 2 · Vallejo rack slotted upper x 1

6h 11m 252 g PLA · 252 g

Filament saver version

2 plates 14h 5m 483 g PLA

X1 Carbon, X1E, A1, P1S, H2D, P1P, X1, H2D Pro, H2S, P2S, H2C, X2D, A2L

This is V2.

Plate Details (2)

0.4 mm nozzle, all plates

Plate 1 · Vallejo rack slotted upper x 1

7h 2m 240 g PLA · 240 g

Plate 2 · Vallejo rack standard x 4

7h 4m 243 g PLA · 243 g

Budget Print, Suitable for Mini - 0.2mm, 3 walls, 10% infill

4 plates 4h 58m 134 g PLA

A1 mini, A1, P1S, X1E, H2D, X1, P1P, X1 Carbon, H2D Pro, H2S, P2S, H2C, X2D, A2L

• 50% less filament • 2x Faster print • Fits A1 Mini Note that this profile prints somewhat less sturdy! Works fine as long as you don't keep taking the rack in and out of your Skadis :)

Plate Details (4)

0.4 mm nozzle, all plates

Plate 1 · Slotted - A1 Mini - Part 3

1h 20m 36 g PLA · 36 g

Plate 2 · Slotted - A1 Mini - Part 2

1h 17m 34 g PLA · 34 g

Plate 3 · Slotted - A1 Mini - Part 1

1h 18m 36 g PLA · 36 g

Plate 4 · Slotted - A1 Mini - Part 4

1h 2m 28 g PLA · 28 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Designer's Description

A Vallejo paint holder, which utilises the full width of the 76x56cm Ikea Skadis peg board. A total of 140 paints can be stored per board. Model is split into 4 easy to print pieces over 2 beds. Print 4 of the standard holders and 1 upper.

I wanted to get as much paint as I could onto the pegboard. You will be able to fit 5 x rows per board, each row will hold 28 x paints. I have tested it with Vallejo, Green Stuff World and Army painter. This is around 3 to 4 more paints per row than traditional holders.

Please ensure that the rear pegs are supported across their length. The included 3mf are pre-supported.

I have uploaded a STEP file for a better overall print if you decide not to use the 3mf. Also any adjustments/remix can be made if need be.

Each part is numbered at the back.

I'd suggest a minimum of 3 walls to ensure the pegs are strong enough.

*** V2 now added following a request. This version allows you to see more of the bottle label and reduces the amount of filament, however it's strength will be effected. I have not tested this, so use at your own risk ***

PLEASE NOTE. Due to their length, these holders are prone to warping. 3d printing and material properties mean that warping is always a risk. Please take steps to reduce this yourself by using glue stick, larger brims, etc. Bed adhesion and warping is not a model issue, I can't do anything about it.

vallejo skadis green stuff world army painter gsw painting miniatures hobby paint holder