LayerUp Stats 14
Add Jul 14, 26 Sync Sep 5, 26
Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.

Paint Rack Stack Folding Holder (6x5)

for Tabletop Accessories Layer by Layer
Loch
Organizers Free
View on MakerWorld 795 1,873 Added Oct 10, 24 | Updated Sep 5, 26 Support Loch by Liking and Boosting their model.
Plan Your Print
About 720 g of filament From the designer's print profile
Print Profile (2) 0.2mm layer, 4 walls, 20% infill 21h 49m 720 g PLA
0.2mm layer, 4 walls, 20% infill
4 plates 21h 49m 720 g PLA
X1 Carbon, P1S, P1P, X1, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
• 0.2mm layer height • Slim support needed for the connector beams • No support needed for the bottle racks, just slow print speed at the inclined section. • 4 walls for improved strength for the lock and stand. • 3 wall loops for the bottle blocks with 10% infill and less top and bottom layers to reduce filament and print time.
Plate Details (4)
0.4 mm nozzle, all plates
Plate 1
2h 50m 101 g PLA · 101 g
Plate 2
9h 30m 301 g PLA · 301 g
Plate 3
6h 23m 201 g PLA · 201 g
Plate 4
3h 6m 117 g PLA · 117 g
35mm Bottles - 0.2mm layer, 3 walls, 10% infill
2 plates 7h 23m 191 g PLA
A1, P1S, H2D, X1 Carbon, X1, X1E, P1P, H2D Pro, H2S, P2S, H2C, X2D, A2L
I LOVE the original design by Loch , but I have a mix of different diameter bottles of paints and washes etc. The only adjustment made was I widened the hole to fit 35mm diameter bottles (35.8mm to be exact), so that way I can utilize the rack for what I have. I thought this may be useful for some others who may be using Tamiya paints for example. The maximum height of the bottle remains the same as the original model design, the depth was not altered. Make sure to print the 2nd plate, as I left the original unmodified shelf model for those who want to mix and match different shelves. Note: I'm not sure if this fits the A1 Mini printers, But Loch has a smaller version specific for the Mini. If there's a want, I can make a profile for that model too. Just ask :)
Plate Details (2)
0.4 mm nozzle, all plates
Plate 1 · Original Design
3h 43m 96 g PLA · 96 g
Plate 2 · Modified- 35mm for Tamiya & other brands
3h 40m 95 g PLA · 95 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description
  • Update 1: Changed the print profile for the bottle blocks. Reduced amount of wall loops to 3, and the infill to 10% to reduce print time and save a bit on filament.
  • Update 2: Added print recommendations.
Paint Rack Stack Folding Holder (6x5)

Now also available a 5x4 version that is A1 Mini Compatible, which can be found here .

I don't have a workshop, hobby room, or even a hobby station. A couple of drawers and shelves are what I have to store my stuff.
That is why I've designed this paint holder. It folds up for storage, and down to have a nice sorted overview of all my paints when I take a spot at the table to paint.

As I have a mix of different paint bottles/containers, I've designed the holder such that different bottles can be placed without the need for inserts or changing out parts to fit my needs. The bottles of Citadel, Vallejo, Army Painter all fit . Even the large Citadel bottles fit!

The locking mechanism is a print in place flexible part.

The bottle blocks have a slot on the back for the lock and stand parts to connect to. I've left all the others in place so that all blocks stick out the same way on the back, creating a nice flat surface. It also leaves enough room to connect things in case someone comes up with a handy tool to add to it!!

Print Recommendations

I recommend to use 4 wall loops for the beams and the lock and stand legs, as those need rigidity for their snap fit connections. The beams need supports (slim suffices) for the snap-fit pins. These supports need to be removed before assembly.

The bottle racks would suffice with 3 wall loops and 10% infill. These also can be printed without support.

Assembly Instructions
  • Place two beams with the pints upwards and press the first bottle block on the pins.
  • Continue with the rest of the bottle blocks.
  • Press the pins of the other beams in the holes on top of the bottle blocks.
  • Place the assembly face down and tilt the bottle blocks such that the underside is facing up.
  • Take one Lock and Stand Long and place it at the indicated slot. There should only be one way to make it fit.
  • Press firmly until it slides in place.
  • Take the second Lock and Stand Long and place it on the opposite side and press firmly until it slides in place.
  • Take the Lock and Stand and place it at the indicated slots. There should be only one way to make it fit.
  • Press firmly until both clips slide in place.
  • Compress the lock
  • While compressed rotate the blocks and release the lock in place.
  • Enjoy your own Paint Rack Stack Folding Holder!

1

2

3

4

5

6

7

8

9

10

11

12

Enjoy

Happy Printing!

_____________

Tabletop Wargame Assets:

V1: Tokens and Travel Box

Miniature Painting Assets:

Tabletop Role-Playing Game:

paint paint holder vallejo vallejo paint holder citadel citadel paintholder army painter miniature rack folding

More by Loch

Kaelvoryn – The Stoneheart Tyrant Dice Tower
Kaelvoryn – The Stoneheart Tyrant Dice Tower
See more prints by Loch...