Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Paint rack for dropper bottles
Organizers
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 246 g of filament
From the designer's print profile
Print Profile (4) Fixed- A1 Mini 5x6 Bottles 0.2mm layer, 2 walls, 15% infill 4h 25m 142 g PLA
Fixed- A1 Mini 5x6 Bottles 0.2mm layer, 2 walls, 15% infill
4 plates
4h 25m
142 g PLA
A1 mini, A1, P1S, P1P, H2D Pro, H2S, P2S, X1, H2C, X1 Carbon, X1E, H2D, X2D, A2L
Fixed the leg issue, it was rotated somehow
Plate Details (4)
0.4 mm nozzle, all plates
Plate 1
1h 29m
43 g
PLA · 43 g
Plate 2
1h 44m
58 g
PLA · 58 g
Plate 3
41m
26 g
PLA · 26 g
Plate 4
32m
15 g
PLA · 15 g
7x6 Bottles 0.2mm layer, 2 walls, 15% infill
2 plates
6h 36m
218 g PLA
A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
Plate Details (2)
0.4 mm nozzle, all plates
Plate 1
3h 59m
127 g
PLA · 127 g
Plate 2
2h 37m
91 g
PLA · 91 g
0.2mm layer, 2 walls, 15% infill
3 plates
7h 28m
246 g PLA
A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
Plate Details (3)
0.4 mm nozzle, all plates
Plate 1
3h 10m
102 g
PLA · 102 g
Plate 2
3h 8m
102 g
PLA · 102 g
Plate 3
1h 10m
42 g
PLA · 42 g
A1 Mini (not the bigger shelf) Holder for 4 60ml Bottles
1 plate
5h 18m
214 g PLA
A1, A1 mini, X1 Carbon, H2D, X1E, P1S, P1P, X1, H2D Pro, H2S, P2S, H2C, X2D, A2L
This supports the x6 versions, not the x7 rows!
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
5h 18m
214 g
PLA · 214 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description
Hello!
I made a Rack to solve my issue of too many paints!
It fits all standart dropperbottles, Army Painter, Vallejo, Scale75, AK Interactive…
I made one for my Kallax shelf, it fits 7x6 bottles (42 in total)
Then I ran out of room and made one larger, 7x7 bottles (49).
I also added one for the A1 Mini, with room for 5x6 bottles (30).
the callax version is exactly 170mm in width, the height is 320mm.
I tried maxing out the buildplates, so the height is actually a bit longer than the buildplate.
I would recommend superglueing the feet to the rack, this creates much more stability (did not glue for the pictures, so it works without it as well, but 1 bump and it could tip!)