Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Expandable 26mm Maximum Density Paint Rack
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 110 g of filament
From the designer's print profile
Print Profile (3) 0.2mm layer, 2 walls, 15% infill 3h 40m 110 g PLA
0.2mm layer, 2 walls, 15% infill
1 plate
3h 40m
110 g PLA
X1 Carbon, A1 mini, P2S, H2S, X1, P1P, A1, X1E, X2D, H2D, H2C, H2D Pro, P1S, A2L
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
3h 40m
110 g
PLA · 110 g
Side Strength Add-On
1 plate
1h 51m
92 g PLA
X1 Carbon, H2C, P1S, H2D Pro, H2S, X1, A1, P2S, A1 mini, X2D, X1E, H2D, P1P, A2L
I increased the height of my paint rack from 4 sections to 6 sections. It's getting a bit front-heavy so adding these side plates was my solution. Reversable. One for the bottom, one for multiple middles, one for the top.
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
1h 51m
92 g
PLA · 92 g
extra strength add-ons for super tall holders
4 plates
7h 43m
301 g PLA
X1 Carbon, P1S, A1, A2L, H2C, X1E, H2D Pro, H2S, H2D, P2S, X1, P1P, X2D
After being super tall for a while, something managed to knock over my paint stand. I decided to beef up the strength of the bottom “foot” layer, extend it out the back so I could clamp it to the table, and put on some thick side walls. All of these stronger parts are included here. These are the clamps I'm using. https://www.amazon.com/dp/B09MTGVJBR
Plate Details (4)
0.4 mm nozzle, all plates
Plate 1
2h 19m
110 g
PLA · 110 g
Plate 2
50m
31 g
PLA · 31 g
Plate 3
1h 58m
66 g
PLA · 66 g
Plate 4
2h 36m
94 g
PLA · 94 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description
For Army Painter and Vallejo and similar paint bottles.
I know there are 100s of really good Paint Racks already. I had a few specific goals for mine:
- Sit on my table, not wall mount.
- The most paint bottles per square inch.
- Expandable, both horizontally and vertically so I can buy more paints without starting over
This is my first ever upload of an original 3d model. I did it in Plasticity. Feedback welcome.
There are two pieces included, one “base”, you print one per unit width you want. One “stack”, print one per unit width you want plus another of that number per additional height you want. Also, pegs, you need two two connect any two pieces. There are 4 identical in the file.