Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.

Square Cribbage Board

Plan Your Print
About 1,230 g of filament From the designer's print profile
Print Profile (2) 0.2mm layer, 4 walls, 35% infill 38h 53m 1,230 g PLA
0.2mm layer, 4 walls, 35% infill
4 plates 38h 53m 1,230 g PLA
A1, H2D Pro, H2D, H2S, H2C, X2D, A2L
Plate Details (4)
0.4 mm nozzle, all plates
Plate 1 · Body
16h 40m 738 g PLA · 738 g
Plate 2 · Insert
3h 100 g PLA · 3 g PLA · 7 g PLA · 90 g
Plate 3 · Track
14h 43m 244 g PLA · 23 g PLA · 221 g
Plate 4 · Lid
4h 30m 148 g PLA · 69 g PLA · 72 g PLA · 7 g
0.2mm layer, 4 walls, 35% infill
5 plates 42h 50m 1,374 g PLA
A1, H2S, H2C, P2S, H2D, H2D Pro, X2D, A2L
Plate Details (5)
0.4 mm nozzle, all plates
Plate 1 · Body
16h 41m 738 g PLA · 738 g
Plate 2 · Insert
3h 100 g PLA · 3 g PLA · 7 g PLA · 90 g
Plate 3 · Track
14h 44m 244 g PLA · 23 g PLA · 221 g
Plate 4 · Lid
4h 32m 148 g PLA · 69 g PLA · 72 g PLA · 7 g
Plate 5 · Blank Lid
3h 53m 144 g PLA · 82 g PLA · 62 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description

I like to re-imagine classic games into new designs. This design is a three track cribbage board with scoring built into the track on each side.

The lid is lightly held in place with 8 - 2mm thick by 6mm round magnets.

To get the best possible finishes, I separated the board into parts to be printed face down, then glued them together. If you wish to change the colors, its best to change the filament profiles, as the painting on this file is finicky.

I hope you enjoy this print.

cribbage cribbage board card game
Cribbage box art Cribbage 1630 Layer by Layer
Cover Colors

Main colors from the cover art. Find matching filament, or tap swatches to narrow.

Matching filament