Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Escape Logic Game
Complete Game
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 129 g of filament
From the designer's print profile
Print Profile 3h 30m 129 g PETG
What it takes
1 plate
3h 30m
129 g PETG
P1S, P1P, X1, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
0.2 standard profile
triangle infill 15%
support enabled
Not sure if it fits A1 mini bed, but please try it out
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1 · escape-game
3h 30m
129 g
PETG · 129 g
Designer's Description
Can be printed pla or petg, needs support on the play area and cover.
Other than that, maybe ironing if you want a smoother finish.
The aim of this game is to get the big square out of the box.
First, you need to set all pieces according to the game start positions showed in the photo.
Then, by moving the pieces up, down, left, right you need to find a way to free the big square. You are not allowed to lift any piece from the playground.
The arrow is the direction you should point the big hole in the playground