Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Deep Sea Adventure Boost Box Insert
Inserts
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 42 g of filament
From the designer's print profile
Print Profile (2) 0.2mm layer, 2 walls, 15% infill 1h 26m 42 g PLA
0.2mm layer, 2 walls, 15% infill
1 plate
1h 26m
42 g PLA
P1S, A1 mini, A1, X1 Carbon, X1E, X1, P1P, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
• Standard @BBL X1C 0.2mm
• No-brim
• Gyroid infill
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1 · final
1h 26m
42 g
PLA · 42 g
Room for 6 dice
1 plate
2h 27m
43 g PLA
P2S, P1P, X1E, H2C, H2D, X1 Carbon, H2S, X1, H2D Pro, P1S, A1, A1 mini, X2D, A2L
I removed the block for the air tracker, to make room for the Expasion Dice. The air tracker has to be positioned as shown in the image, since it's a little thicker than the divers.
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
2h 27m
43 g
PLA · 43 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description
A printable insert for the board game, Deep Sea Adventure! Note that this is specifically for the “Boost!” version of the game, which includes the extra blue dice and suitcase chips.
I designed this based on the dimensions of my own game, so you may find it helpful to tweak them yours :)
Everything stacks to be flush with the top of the box, which prevents any spillage during storage. There's also a little notch to help pull it out of the box. See the photos for a guide on how to load up the pieces.
Prints as a single piece without supports.
