Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Mahjong Card Holder
Card & Tile Holders
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 70 g of filament
From the designer's print profile
Print Profile 2h 1m 70 g PETG
What it takes
1 plate
2h 1m
70 g PETG
P1S, X2D, X1E, P2S, P1P, A2L, X1, X1 Carbon, H2D, H2C, A1, H2S, H2D Pro
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
2h 1m
70 g
PETG · 70 g
Designer's Description
Mahjong play on a standard square card table just doesn't seem to give me enough room, so I designed this card holder to slide under the mat, and to be weighed down by the rack/tiles. It holds the card at a good angle so that it is not obvious to others at the table, if you use line stick on markers. The hinge only holds the angle on the table, and allows you to print it flat. This model was not ment to fold past the angle it rests at.
I printed this on my P1S, I used PETG. 7% Gyroid is my go to infill, but you do you.
