Tak game set with 6x6 board & box

Complete Game Free

View on MakerWorld 83 393 Added Jul 22, 24 | Updated Aug 5, 26 Support DomesticWithAnMD by Liking and Boosting their model.

Remix View the original model

Plan Your Print

✓ Optional multicolor profile The designer also offers a multicolor way to print this (an MMU/AMS profile or per-color parts)

About 496 g of filament From the designer's print profile

Print Profile (2) A1 size bed - 0.2mm layer, 2 walls, 15% infill 19h 21m 496 g PLA

A1 size bed - 0.2mm layer, 2 walls, 15% infill

4 plates 19h 21m 496 g PLA

A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

The dual color board works better in OrcaSlicer, as the purge tower can be moved further into the corner. I made modified the purge tower so that this one should work for an A1 size bed if OrcaSlicer isn't an option for you. If you have very colour different filaments, the reduced purge tower might result in a little bit of color bleed at the early transition (depending on your purge volumes). The board fits very snugly into the box, so you may want to increase the box scale by a percent or so if you don't have your on-onject supports very dialed in. Snug normal supports might also be easier than the tree hybrid here depending on your setup.

Plate Details (4)

0.4 mm nozzle, all plates

Plate 1

4h 23m 174 g PLA · 174 g

Plate 2

4h 30m 142 g PLA · 118 g PLA · 24 g

Plate 3

5h 26m 86 g PLA · 86 g

Plate 4

5h 2m 94 g PLA · 94 g

0.2mm layer, 2 walls, 15% infill

4 plates 18h 43m 482 g PLA

P1S, P1P, X1, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L

Plate Details (4)

0.4 mm nozzle, all plates

Plate 1

4h 37m 171 g PLA · 171 g

Plate 2

4h 38m 139 g PLA · 116 g PLA · 23 g

Plate 3

4h 47m 84 g PLA · 84 g

Plate 4

4h 41m 88 g PLA · 88 g

As sliced by the designer. Your printer, filament, and settings may change these numbers.

Designer's Description

This is a remix of Archa91's Tak set on Thingiverse, where I've increased the board size and box size to make use of the A1's full print bed, and I have also colored it for AMS printing.

I played on the original size board for a few months, but it was a bit small for our games table as we had to lean in to reach the small board and we also found ourselves knocking stacks over when trying to move them so I tweaked things to be a little prettier and easier to use.

The supports on the groove for the box lid are pretty tight.

Game rules are available for free here: https://ustak.org/play-beautiful-game-tak/

a1 ams - lite ams 2player 2playergames strategic board game