Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Ahoy board game insert
Inserts
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
✓ Stores vertically
Stands on its side; contents stay put
About 194 g of filament
From the designer's print profile
Print Profile (2) 0.2mm layer, 2 walls, 15% infill 6h 3m 194 g PLA
0.2mm layer, 2 walls, 15% infill
8 plates
6h 3m
194 g PLA
A1, P1S, H2D, X1E, P1P, X1 Carbon, X1, H2D Pro, H2S, P2S, H2C, X2D, A2L
Plate Details (8)
0.4 mm nozzle, all plates
Plate 1 · general supply
1h 42m
72 g
PLA · 72 g
Plate 2 · White
32m
9 g
PLA · 9 g
Plate 3 · blue
55m
38 g
PLA · 38 g
Plate 4 · Pink
27m
15 g
PLA · 15 g
Plate 5 · yellow
46m
29 g
PLA · 29 g
Plate 6 · Red
33m
9 g
PLA · 9 g
Plate 7 · Treasure chest
32m
8 g
PLA · 8 g
Plate 8 · Green
35m
14 g
PLA · 14 g
0.2mm layer, 2 walls, 15% infill
2 plates
4h 24m
192 g PLA
A1, X1 Carbon, X1E, X1, P1P, H2D, P1S, H2D Pro, H2S, P2S, H2C, X2D, A2L
Same design as before but all in 1 color on two plates to make printing easier.
Plate Details (2)
0.4 mm nozzle, all plates
Plate 1 · plate 1
2h 50m
124 g
PLA · 124 g
Plate 2 · plate 2
1h 33m
68 g
PLA · 68 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description
Insert for ahoy board game with the expansion and all crowdfunded components. It does a good job with vertical storage. It was a tight fit, you may have to sand or file down a piece or two.
Sleeved cards probably will not fit, but the card deck could be adjusted to be taller to mitigate this. It could cause some lid lift.
I love having inserts for my games, and when the new ahoy crowdfunding project fulfilled I wanted one for this game, didn't see one, so I made my own. This is my first ever design so things are a little rough but it works. Any adjustments or suggestions are welcome.
/pic8665618.jpg)
