Log in to join the conversation.
Evacuation Insert/Organizer
TL;DR: No-lid-lift, suitable for vertical storage, fits sleeved cards (see last page of pdf), fast setup, and teardown insert for the boardgame Evacuation. Pro Tip: shuffle the required components during re-storing into the box for an even faster setup next time.
Update 17.03.2024:
Thx to the user Michelito42 who made me aware that there was a small measurement error regarding the player board. It was a bit too tight. Therefore I uploaded a v2 of the spacer as well as the resource trays. It should be far more relaxed fitting
If you appreciate my work
In case you want to sell prints of my design, feel free to join my club for a commercial licence.
At least I would appreciate it if you left a like and after printing provided a rating and a comment - this would help me further improve myself.
As for the other inserts I create, I aim for the following (in priority order):
- Enhance step and tear-down part (goal: setup should never take longer than a refresh of the rules to the game)
- Opted to store the majority of sleeved cards (specific sizes of trays see uploaded pdf)
- The game box can be stored horizontally or vertically
- Try to be as lightweight and resourceful as possible - but functionality wins
- No Support needed
A few key items (further information on printing see uploaded pdf):
- Printing requirement: 0.4 nozzle, Arachne Wall Generation, largest printing object 190mm (for the resource trays there are 2 ALTernate trays to fit on those beds)
- I normally print without Top/Bottom layers and between 10 and 15% Honeycomb infills and 2 walls to achieve the look you can see in the pics. In case there are icons/information (e.g. card trays), I only print without Top/Bottom layers up to 2mm in height.
- If you use PrusaSlicer/BambuSlicer or forks of it (i.e. I use OrcaSlicer) I suggest that you load the 3mf-files - those are pre-cut and names contain additional printing information
- All those settings result in appr. 500g of filament needed for the whole print
As always, I love suggestions & feedback to improve further.
Have fun printing.
Evacuation 2023
Layer by Layer
Cover Colors
Hello dear community 🙂 I wanted to let you know that another one of my designs has become available for free download - this time for Evacuation. As always, there is a PDF for printing instructions in the download package as well as (because often overlooked) a diagram on page 2 for sorting into the box - which you are welcome to print out and place in the box. There are also custom markers (for both planets) - they are a bit small, but there isn't that much space on the player board - and they are optional 🙂 There are separate trays for the techs - you can reshuffle the used ones before putting them away - then you can just hand them out the next time you play. Oh yes - almost forgot the link if anyone wants to print it: Evacution insert - by RiftForge 3D3
