Log in to join the conversation.
Insert Čajová zahrada (Tea Garden) + Puerh
EN:
This 3D model is designed as a practical insert for the Tea Garden board game along with the Pu-erh extension. It allows you to clearly store all game components, including the expansion in the original box. The insert is optimized for printing on the Prusa Mini or any printer with a minimum print area of 15 × 15 × 6 cm.
Compatibility:
- Tea Garden Board Game
- Pu-erh Extension
Card model variants: The "PlayersA", "PlayersB" and "Cards" models are available in two variants, depending on whether you have cards with or without sleeves:
- Unwrapped cards → use models from the "not sleeved cards" folder (or the complete "all (not sleeved)" file)
- Cards with packaging → use models from the "Sleeved cards" folder (or the complete "all (sleeved)" file)
Note on component thickness: In some countries (e.g. the Netherlands), the thickness of the carton may vary for some game components. If the compartments fit too tightly or loosely, this regional difference may be the reason.
Recommended settings:
- Material: PLA/PETG
- Layer Height: 0.2 mm
- Infill: 5%
- No supports
Note: This is version 1.1 of the model. I will be happy for any suggestions for improvements or feedback for the next version. The insert can theoretically be used without the Pu-erh extension, but this has not been tested — some bins may remain partially or completely empty. This fanwork is not an official product. All rights to the game Tea Garden and the Puerh expansion, including the title, graphics and design of the components, belong to the publisher Albi and the author Tomáš Holka.
EN:
This 3D model is designed as a practical insert for the board game Tea Garden along with its expansion Puerh. It allows you to neatly store all game components, including the expansion, inside the original box. The insert is optimized for printing on a Prusa Mini or any printer with a minimum build volume of 15 × 15 × 6 cm.
Compatibility:
- Tea Garden Board Game
- Pu-erh expansion
Model variants based on card sleeves: The models "PlayersA", "PlayersB", and "Cards" are available in two variants depending on whether your cards are sleeved or not:
- Cards without sleeves → use the models from the "not sleeved cards" folder (or the complete file "all (not sleeved)" )
- Cards with sleeves → use the models from the "Sleeved cards" folder (or the complete file "all (sleeved)" )
Note on component thickness: In some countries (e.g. the Netherlands), the cardboard thickness of certain game components may differ from other regional editions. If compartments feel too tight or too loose, this regional variation could be the reason.
Recommended print settings:
- Material: PLA/PETG
- Layer height: 0.2 mm
- Infill: 5%
- No supports
Note: This is version 1.1 of the model. I'm open to any suggestions or feedback for improvements in future versions. The insert can theoretically be used even without the Puerh expansion, but it hasn't been tested — some compartments may remain partially or fully empty. This is a fan-made accessory and not an official product. All rights to the game Tea Garden and the Puerh expansion, including their names, artwork, and game design, belong to Albi and the author Tomáš Holek.
Translated from Czech - show original
CZ:
Tento 3D model je navržen jako praktický insert pro stolní hru Čajová zahrada spolu s rozšířením Puerh. Umožňuje přehledné uložení všech komponent hry včetně rozšíření do původní krabice. Insert je optimalizován pro tisk na Prusa Mini nebo jakoukoli tiskárnu s minimální tiskovou plochou 15 × 15 × 6 cm.
Kompatibilita:
- Stolní hra Čajová zahrada
- Rozšíření Puerh
Varianty modelů podle karet: Modely „PlayersA", „PlayersB" a „Cards" jsou dostupné ve dvou variantách podle toho, zda máte karty v obalech (sleeves), nebo bez:
- Karty bez obalu → použijte modely ze složky „not sleeved cards" (nebo kompletní soubor „all (not sleeved)" )
- Karty s obalem → použijte modely ze složky „Sleeved cards" (nebo kompletní soubor „all (sleeved)" )
Poznámka k tloušťce komponent: V některých zemích (např. v Nizozemsku) se může lišit tloušťka kartonu u některých herních komponentů. Pokud vám přihrádky sedí příliš těsně nebo naopak volně, může být důvodem právě tato regionální odlišnost.
Doporučené nastavení:
- Materiál: PLA / PETG
- Výška vrstvy: 0.2 mm
- Infill: 5 %
- Bez podpěr
Poznámka: Toto je verze 1.1 modelu. Budu rád za jakékoli návrhy na vylepšení nebo zpětnou vazbu pro další verzi. Insert lze teoreticky použít i bez rozšíření Puerh, ale není to otestováno — některé přihrádky mohou zůstat částečně či zcela prázdné. Tato fanouškovská tvorba není oficiálním produktem. Všechna práva ke hře Čajová zahrada a rozšíření Puerh, včetně názvu, grafiky a designu komponent, náleží vydavateli Albi a autorovi Tomáši Holkovi.
EN:
This 3D model is designed as a practical insert for the board game Tea Garden along with its expansion Puerh. It allows you to neatly store all game components, including the expansion, inside the original box. The insert is optimized for printing on a Prusa Mini or any printer with a minimum build volume of 15 × 15 × 6 cm.
Compatibility:
- Tea Garden board game
- Puerh expansion
Model variants based on card sleeves: The models "PlayersA", "PlayersB", and "Cards" are available in two variants depending on whether your cards are sleeved or not:
- Cards without sleeves → use the models from the "not sleeved cards" folder (or the complete file "all (not sleeved)" )
- Cards with sleeves → use the models from the "Sleeved cards" folder (or the complete file "all (sleeved)" )
Note on component thickness: In some countries (e.g. the Netherlands), the cardboard thickness of certain game components may differ from other regional editions. If compartments feel too tight or too loose, this regional variation could be the reason.
Recommended print settings:
- Material: PLA / PETG
- Layer height: 0.2 mm
- Infill: 5 %
- No supports
Note: This is version 1.1 of the model. I'm open to any suggestions or feedback for improvements in future versions. The insert can theoretically be used even without the Puerh expansion, but it hasn't been tested — some compartments may remain partially or fully empty. This is a fan-made accessory and not an official product. All rights to the game Tea Garden and the Puerh expansion, including their names, artwork, and game design, belong to Albi and the author Tomáš Holek.
