Cards against Humanity deck holder 1000 cards

Description It's a two-piece card deck that is meant to hold about 1000 cards but can definitively hold closer to 1400. Theres also the “extra” holder which is a convenient tool for the Czar to easily collect and distribute white cards after each turn and black cards after each round. For the main body and lid Yes, you will need to join the two halves , for the connecting parts i used just some simple “E600 adhesive” that you can get at any craft store or Walmart. However, if you want plastic weld the edges together that is always better (Always use a mask no matter what) . Printing profile You're going to want to turn supports on since it leaves a nice design for the logo in my opinion. For optimal fast printing I always recommend turning on “ Advanced ” settings and setting everything under the “ Line width ” section to 0.6 since it greatly reduces printing time. Also, there is no need for any infill so set it to 0%. Finally, it's not necessary but I recommend going to printer settings, under “ Extruder ” set “ Z hop when retract ” to 0 since it decreases print time and wear on the printer.