Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Phase 10 Book - Full 108-Card Deck Storage
Card & Tile Holders
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 118 g of filament
From the designer's print profile
Print Profile 3h 56m 118 g PLA
What it takes
1 plate
3h 56m
118 g PLA
X1 Carbon, P1S, A2L, H2S, H2C, X1E, X2D, P2S, A1, X1, H2D Pro, H2D, P1P
Print-ready X1 Carbon profile for the complete three-piece Phase 10 PlayerBook.
• 0.20 mm layer height
• 2 wall loops
• 15% sparse infill
• Red and white PLA with AMS assignments included
• Supports and plate arrangement already configured
• Approximately 3 h 55 min and 117 g total
Allow the plates to cool before removal. Dry-fit all hinge parts and verify the polarity of all four 6 × 3 mm magnets before gluing.
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
3h 56m
118 g
PLA · 76 g
PLA · 42 g
Designer's Description
Turn the complete Phase 10 deck into a compact shelf-friendly PlayerBook. This final v7 revision stores all 108 cards in one straight-sided rectangular tray and closes with four 6 × 3 mm magnets.
FEATURES
- 60 × 92 × 36 mm internal card cavity
- 38.4 mm-deep white page tray
- Flat rectangular deck storage with retrieval clearance
- Enlarged and correctly oriented rear phase guide
- Raised white front and spine lettering
- Paper-style surface texture on the white page block
- Proven three-piece snap-hinge assembly
- Full circular pockets for four 6 × 3 mm magnets
- Pre-arranged X1 Carbon Textured PEI project
PRINTING
- Bambu Lab X1 Carbon, 0.4 mm nozzle
- 0.20 mm layer height
- 2 wall loops
- 15% sparse infill
- Red and white PLA
- Approximately 3 h 55 min and 117 g with the supplied profile
- Supports and colour assignments are already stored in the 3MF
Allow the parts to cool before removal. Dry-fit all three hinge parts before installing the magnets, and check every magnet’s polarity before gluing.
This is a fan-made storage accessory. Phase 10 and related marks belong to their respective owner. This model is not affiliated with or endorsed by the rights holder.
