Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.
Log in to join the conversation.
Phase 10 Box - scoreboard
Scoring & Tracking
Free
Plan Your Print
Sign in
to track this print from Want to Printed.
About 182 g of filament
From the designer's print profile
Print Profile (8) Updated with logo 6h 22m 182 g PLA
Updated with logo
3 plates
6h 22m
182 g PLA
P1S, P1P, X1, X1 Carbon, X1E
Plate Details (3)
0.4 mm nozzle, all plates
Plate 1
2h 55m
105 g
PLA · 4 g
PLA · 101 g
Plate 2
45m
9 g
PLA · 2 g
PLA · 2 g
PLA · 2 g
PLA · 1 g
PLA · 1 g
PLA · 1 g
Plate 3
2h 41m
68 g
PLA · 5 g
PLA · 63 g
Enforced supports for scoreboard - cleaner but longer
3 plates
7h 44m
204 g PLA, PETG
P1S, P1P, X1, X1 Carbon, X1E
Plate Details (3)
0.4 mm nozzle, all plates
Plate 1
2h 56m
105 g
PLA · 4 g
PLA · 101 g
Plate 2
45m
9 g
PLA · 2 g
PLA · 2 g
PLA · 2 g
PLA · 1 g
PLA · 1 g
PLA · 1 g
Plate 3
4h 3m
90 g
PLA · 4 g
PETG · 16 g
PLA · 70 g
For A1 Mini - printed and tested by another
4 plates
7h 21m
218 g PLA
A1 mini, A2L
Printed by another with a Mini & said it printed well, as I setup how I think it could print, without the prime tower thought not sure how it will come out and you may want to increase flushing volume to 1.2 or something
Plate Details (4)
0.4 mm nozzle, all plates
Plate 1
3h 30m
126 g
PLA · 3 g
PLA · 123 g
Plate 2
27m
4 g
PLA · 2 g
PLA · 1 g
PLA · 1 g
Plate 3
2h 57m
84 g
PLA · 4 g
PLA · 80 g
Plate 4
26m
4 g
PLA · 2 g
PLA · 1 g
PLA · 1 g
For A1
3 plates
7h 22m
222 g PLA
A1, A2L
Plate Details (3)
0.4 mm nozzle, all plates
Plate 1
3h 34m
128 g
PLA · 4 g
PLA · 124 g
Plate 2
48m
9 g
PLA · 2 g
PLA · 2 g
PLA · 2 g
PLA · 1 g
PLA · 1 g
PLA · 1 g
Plate 3
3h
85 g
PLA · 5 g
PLA · 80 g
8 Player Version
3 plates
6h 54m
184 g PLA, PETG
P1S, P1P, X1, X1 Carbon, X1E
8 Player Version
Plate Details (3)
0.4 mm nozzle, all plates
Plate 1 · 8 Player Version
3h 5m
106 g
PLA · 5 g
PLA · 101 g
Plate 2
1h 2m
10 g
PLA · 2 g
PLA · 2 g
PLA · 1 g
PLA · 1 g
PETG · 1 g
PLA · 1 g
PLA · 1 g
PLA · 1 g
Plate 3
2h 46m
68 g
PLA · 4 g
PLA · 64 g
For A1 (0.2mm layer, 2 walls, 10% infill)
3 plates
6h 26m
174 g PLA
A1, A2L
Plate Details (3)
0.4 mm nozzle, all plates
Plate 1 · Bottom
3h 9m
104 g
PLA · 4 g
PLA · 100 g
Plate 2 · Pins (Print 2x)
25m
3 g
PLA · 1 g
PLA · 1 g
PLA · 1 g
Plate 3 · Lid
2h 53m
67 g
PLA · 4 g
PLA · 63 g
Divider for cards & pegs, and removed instructions text
3 plates
5h 41m
177 g PLA
P1S, P1P, X1, X1 Carbon, X1E
Removed the instructions at the bottom of the box, and added a divider to keep the cards and scoring pegs separated inside. Also inverted the box lid, because I was having problems with stringiness along the tapered edges.
Plate Details (3)
0.4 mm nozzle, all plates
Plate 1
2h 37m
101 g
PLA · 101 g
Plate 2
45m
9 g
PLA · 2 g
PLA · 2 g
PLA · 2 g
PLA · 1 g
PLA · 1 g
PLA · 1 g
Plate 3
2h 19m
67 g
PLA · 4 g
PLA · 63 g
board only with no container ( uses less plastic ) A1 mini
2 plates
16h 2m
192 g PLA
A1 mini, X1, X1E, P1S, X1 Carbon, P1P, A2L, A1, P2S, X2D, H2D Pro, H2D, H2C, H2S
Plate Details (2)
0.4 mm nozzle, all plates
Plate 1
2h 12m
54 g
PLA · 4 g
PLA · 50 g
Plate 2
13h 51m
138 g
PLA · 28 g
PLA · 54 g
PLA · 15 g
PLA · 7 g
PLA · 10 g
PLA · 24 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description
TOTAL REDESIGN OF THE BOX SO THAT YOU DON'T HAVE TO MESS WITH SIZES - LID SLIDES IN AND FITS NICE
ORIGINALY DID AS FACE UP PRINT BUT REPRINTING NOW FACE DOWN FOR NICE CLEAN TEXT.
(Depending on your printer there may be a slight bit of cleanup to do to the lid to get it to slid nice takes only seconds and do not take off too much)
Phase 10 Storage Box and score board to keep track of rounds.
HAPPY WITH THE DESIGN NOW, HAPPY PRINTING, AND YOU CAN ADJUST COLORS OF EVERYTHING TO SUIT YOUR NEEDS, THANKS
Boost Me I really appreciate boosts, so if you like the design consider boosting it, thanks!
