LayerUp Stats 7
Add Sep 1, 26 Sync Sep 3, 26
Table Talk
Nothing here yet. Love this design? Say so - the designer might see it.

Phase 10 Deck Case

for Phase 10 (1982) Layer by Layer
Printed Solutions
Card & Tile Holders Free
View on MakerWorld 487 2,152 Added Jan 10, 24 | Updated Sep 3, 26 Support Printed Solutions by Liking and Boosting their model.
Remix View the original model
Plan Your Print
About 125 g of filament From the designer's print profile
Print Profile (3) 0.16mm layer, 4 walls, 25% infill, blue/white, No Supports 4h 38m 125 g PLA
0.16mm layer, 4 walls, 25% infill, blue/white, No Supports
2 plates 4h 38m 125 g PLA
X1 Carbon, P1S, P1P, X1, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
• .16 Layer height • 2 color, blue/White • 4 wall perimeter for strength • 25% honeycomb infill • No support needed
Plate Details (2)
0.4 mm nozzle, all plates
Plate 1
1h 45m 31 g PLA · 31 g
Plate 2
2h 52m 94 g PLA · 89 g PLA · 5 g
For A1 Mini, 0.16mm layer, 4 walls, 25% infill
2 plates 5h 18m 125 g PLA
A1 mini, P1S, P1P, X1, X1 Carbon, X1E, A1, H2D, H2D Pro, H2S, P2S, H2C, X2D, A2L
Objects in profile specifically adjusted for A1 mini.
Plate Details (2)
0.4 mm nozzle, all plates
Plate 1
2h 7m 31 g PLA · 31 g
Plate 2
3h 10m 94 g PLA · 89 g PLA · 5 g
0.2mm layer, 7 walls, 100% infill
1 plate 10m 1 g PLA
P1S, X1E, H2C, X2D, A1 mini, H2D, P1P, H2S, P2S, A2L, H2D Pro, A1, X1, X1 Carbon
This is a pin that fits well into all the holes for the box. I used a little glue to make sure it stays.
Plate Details (1)
0.4 mm nozzle, all plates
Plate 1
10m 1 g PLA · 1 g
As sliced by the designer. Your printer, filament, and settings may change these numbers.
Designer's Description

Phase 10 Deck Case remixed from the Uno Deck case. 2 Color. Requires 6 M3x30 screws. .16 layer heights looks good and 4 walls to help with strength.

phase phase 10 phase10 deck case holder
Phase 10 box art Phase 10 1982 Layer by Layer
Cover Colors

Main colors from the cover art. Find matching filament, or tap swatches to narrow.

Matching filament